Description
Descriptions
3200 Interior Sealer is acrylic copolymer water-based sealer for interior walls. It is specially formulated to provides good protection against mild alkalinity and moisture from substrate.
Features
• Good hiding and build
• Good adhesion
• Provides a smooth finish
• Promotes richer colour appearance
• Good alkaline resistance
• Good moisture resistance
• Good spattering resistance
• Low odour and low VOC
Specifications
- Paint Type: Water-based
- Product Type: Interior
- Finishing: Matt
- Recommended Substrate: Masonry, brick, hard / soft board, asbestos
Surface Preparation
Remove all loose, defective paint or powdery residues, loose chalk, dust and foreign matter. Repair cracks, uneven surfaces with EasySKIM 5000 All Purpose Joint Compound or suitable fillers. Smoothen the putty / filler areas with sand paper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) Pair this sealer with any product from Nippon Paint interior range of products.
Safety Precautions
• Keep container tightly closed and keep out of reach children or away from food and drink.
• Ensure good ventilation during application and drying.
• When applying paint, it is advisable to wear eye protection.
• In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
• Remove splashes from skin by using soap or water.
• Paint must always be stored in a cool place.
• When transporting paint, care must be taken. Always keep container in a secure upright position.
• Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.
More detail about YEE TAT HARDWARE SDN BHD