Panasonic Cylindrical Proximity Sensor GX-112MKA

Panasonic Cylindrical Proximity Sensor GX-112MKA

Category: PROXIMITY SENSOR Available
For more information, visit our official website at sem-eq.com

Description



Model : GX-112MKA
 



Specifications :
 
Model GX-112MKA
Maximum working distance 4mm±10% Note: The maximum working distance is the maximum distance at which the sensor can detect a standard detected object.
Stable detection range 0mm~3.2mm Note: The stable detection range is the detection distance at which the sensor can stabilize the standard detection object (even when using ambient temperature changes and/or supply voltage fluctuations).
Standard detection objects Iron 12mm×12mm×t1mm
Directives to which the CE marking applies EMC Directive
Should be poor Less than 20% of working distance (using standard detection objects)
Repeatability Less than 5% of the working distance
Supply voltage 12V~24V DC±10%, pulsating P-P 10% or less
Consumes current 15mA or less
output • NPN open collector transistor • Maximum inflow current: 100mA (GX-108□) 200mA (except GX-108□) • Applied voltage: 30V DC or less • Residual voltage: 2.0V or less
Maximum reaction frequency 1kHz
Working status indicator Orange LED (on when output ON)
Environmental Performance : Protective construction IP67(IEC)
Environmental performance : Use ambient temperature Use temperature -25 °C ~ +70 °C, storage: -40 °C ~ +80 °C
Environmental performance: Ambient humidity 85%RH or less (when operating at +70°C)
Environmental performance: withstand voltage Connect an AC voltage of 1000V between all connected power terminals and the housing for 1 minute
Environmental performance : insulation resistance Between all power connection terminals and housing, above 500MΩ, based on a DC500V high-impedance meter
Environmental performance : Vibration resistant In the X, Y and Z directions, it can withstand the vibration of 10Hz~50Hz and double amplitude of 1.5mm for up to 2 hours
Environmental performance : Impact resistant In the X, Y and Z directions, it can withstand three shocks with an acceleration of 500m/s² (about 50G).
Material Shell: nickel-plated brass (stainless steel except GX-108 housing), front plug: PBT, rear plug: PC
cable 0-core rubber cable with a cross-sectional area of 2.108mm² (except for GX-0, which has a cross-sectional area of 1.3mm²) and a length of 2m
Cable extension The total length of cables with a cross-sectional area of 0.3 mm² or more can be extended up to 100 m
weight Approx. 95g Note: This weight includes the weight of two nuts.


More detail about SEM Equipment Sdn. Bhd.
SEM Equipment Sdn. Bhd.
SEM Equipment Sdn. Bhd. Industrial Equipment Manufacturer, Ultrasonic Equipment Supplier, Laser Equipment Supply in Johor Bahru (JB), Malaysia ~ SEM Equipment Sdn. Bhd.
Contact Us flagMalaysia