Description
Description
The SP-MC is a compact closed-top tool pouch accessible via a flap that opens from the top down. The flap features a zippered 2-way access pocket that can be reached from either the outside or inside of the bag. The SP-MC includes two external removable side pouches—one functions as a tool pouch and the other as a drill holster. The removable tool pouch has two main pockets sized for a screwdriver or pliers, a pair of thru-pockets, pencil pockets, a stainless steel tape measure clip, and an electrical tape strap. The removable drill holster can store any size drill from 12V to 18V and features 4 drill bit pockets, a stainless steel tape measure clip, and an optional lanyard can be fastened across the drill for additional security. The lanyard can be removed or pushed down if not needed. These extremely valuable removable side pouches can be clipped on your side while working on a ladder.
PRODUCT SPECIFICATIONS:
- Height (H): 12" (30.5 cm)
- Width (W): 13.5" (35 cm)
- Depth: 7" (18 cm)
- Weight (empty): 4lbs (1.8 kg)
- Internal Volume: N/A
- Max Payload: 20lbs (9 kg)
MAXIMIZED TOOL STORAGE CAPACITY:
- Top-down flap access with zippered 2-way access pocket, reachable from inside or outside
- Removable Tool Pouch with pockets for screwdrivers, pliers, thru-pockets, pencil pockets, stainless steel tape measure clip, electrical tape strap, and magnetic flap for securing to a waist belt or trouser pocket.
- Removable Drill Holster for 12V-18V drills with 4 drill bit pockets, stainless steel tape measure clip, optional lanyard for securing drill, and magnetic flap for securing to a waist belt or trouser pocket.
- 11 internal pockets
- V-SWAP™ interchangeable panel system
- Tarpaulin covered rear pocket for added weather & abrasion protection
- “Hang-up” hook
- Detachable over-molded elastomeric grip
- YKK® zippers
- Waterproof Polypropylene plastic base for moisture and abrasion protection
- 5 year limited warranty
OTHER FEATURES:
Warranty: 5 Years (see Veto warranty terms and conditions)
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
More detail about Arvo Aircond & Refrigeration Tools Supply Sdn Bhd
