Description
NIPPON PAINT EA4 FINISH (EP) is a two-pack polyamide cured epoxy finish for use on primed steel surface where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below.
|
Product Features:
• Good resistance to abrasion and mechanical damage
• Excellent on correctly prepared and primed surfaces
• Dry service temperature up to 100°C
|
Application Data
| Application |
: Brush/Roller, Compressed Air Spray, or Airless Spray (preferably use if a thicker coat is required in one application) |
| Thinning |
: Thinner: SA-65 Thinner
Brush/Roller: If necessary, add about 5% thinner by volume
Compressed Air Spray: If necessary, add about 10-15% thinner by volume |
| Touch Dry/ Hard Dry |
: 2 - 3 hours / 16 hours |
| Recoating Interval |
: Minimum 16 hours |
| No. of Coat(s) |
: 1 - 3 coats |
| Theoretical Coverage |
: 6.4 - 10.2 m² per liter per coat |
Coating System
| Type |
Product Name |
No. of Coat(s) |
| Primer/Sealer |
Nippon Paint 8048 |
1 coat |
| Undercoat |
Nippon Paint 8048 |
1 coat |
| Topcoat |
Nippon Paint EA4 Finish (EP) |
1 coat |
| Steel |
| Type |
Product Name |
No. of Coat(s) |
| Primer/Sealer |
Nippon Paint 8048 Zinc Phosphate Primer QD |
1 coat |
| Intermediate |
Nippon Paint 8048 |
1 coat |
| Topcoat |
Nippon Paint EA4 Finish (EP) |
1 coat |
More detail about Chin Chun Hardware Sdn Bhd
Malaysia
