HIOKI 9695-02 Clamp On Sensor
For measuring load current, voltage output sensor 50 A AC
OVERVIEW
Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-02 is a 50 A AC clamp sensor with voltage output for measuring load current.
CAT III 300V
Key Features
- High ±0.3% accuracy
- For inverter devices or commercial power lines
- For power meters and power loggers (may require the 9219)
- Fits in narrow spaces due to compact design
Model No. (Order Code)
| 9695-02 |
Clamp On Sensor. For the PW3360/65, 3169, PW3198 and similar products |
Note: Supports power quality analyzers, power meters and clamp logger LR5051 (50 A sensor only)
SPECIFICATIONS
Basic specifications
Accuracy guaranteed: 1 year
| Rated measurement current |
50 A AC |
| Max. measurement current |
Continuous 60 A (45 to 66 Hz) |
| Output rate |
10 mV AC/ A |
Amplitude accuracy
(45 to 66 Hz) |
±0.3 % rdg. ±0.02 % f.s. (*1) |
| Phase accuracy |
±2° (45 Hz to 5 kHz) |
| Amplitude frequency characteristics |
Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy) |
| Max. rated voltage to earth |
300 V AC rms or less (Insulated conductor) |
| Measurable conductor diameter |
φ 15 mm (0.59 in) or less |
| Operating temperature and humidity |
0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation) |
| Dimensions and mass |
50.5 mm (1.99 in)W × 58 mm (2.28 in)H × 18.7 mm (0.74 in)D, 50 g (1.8 oz)
Output terminal : M3 terminal (outside 3 mm, 0.12 inch diameter)
Option: Connection cable 9219 (3 m, 9.84 ft length) |
*1:f.s. is the sensor始s rated primary current value
OPTIONS
Options (2)
CONNECTION CABLE 9219
Connect with the 9695-02/ -03, Output BNC terminal, 3m (9.84ft) length
CLAMP SENSOR CABLE 9238
For the 9695, 3 m twisted-pair cable with round clipping terminal
Malaysia
