Panasonic EC-G02 Ionizer Malaysia

Panasonic EC-G02 Ionizer Malaysia

Category: PANASONIC CONTROLLER Available
For more information, visit our official website at sjtsuccess.com.my

Description

Specifications and design of the products are subject to change without notice for the product improvement.

Item Specifications
Product Number EC-G02
Part Number EC-G02
Products Name Pulse Air-gun Ionizer
Product details Gun type
Charge removal time 0.5 sec. or less approx. (±1,000 V → ±100 V)
(Note):Typical value for pulse air mode: CONT at 100 mm 3.937 in from the front of discharge nozzle at an applied air pressure of 0.50 MPa.
Applicable fluid Air (dried clean air)
(Note):Dried clean air is the air passing through air dryer (dew point -20 ℃ -4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.)
Supplied air flow 300 ℓ/min. (ANR) or less
Air pressure range 0.05 to 0.50 MPa
Supply voltage Accessory AC adapter INPUT: 100 - 240 V AC ±10 % 50/60 Hz
(OUTPUT: 24 V DC)
Power consumption 30 VA or less
Discharge method High-frequency AC method
Pulse air mode Pulse 1 (long) / Pulse 2 (short) / CONT (continuous) selectable by switch
LED illumination mode ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF)
External input Ionized air emission operation ON / OFF using OR control with trigger switch
Ionized air emission operation ON: Short-circuited to COM (-)
Ionized air emission operation OFF: Open
Ambient temperature 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), AC adapter: 0 to +40 ℃ +32 to +104 ℉
Ambient humidity 35 to 65 % RH (No dew condensation allowed)
Weight 270 g approx. (main unit only)
Accessories AC adapter: 1pc.
Exclusive intermediate cable (oil-resistant, heat-resistant, bending-resistant type) length 2m 6.562 ft: 1 pc.
Straight joints
・Tube outer diameter ø8-ø8mm ø0.315-ø0.315 in compatible type: 1 pc. (Note):At the time of shipment from the factory, ø8-ø8mm ø0.315-ø0.315 in type is attached.
・Tube outer diameter ø8-ø6mm ø0.315-ø0.236 in compatible type: 1 pc.
Connector connection terminal (Manufactured by Molex): 3 pcs.
Remark Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.

More detail about SJT SUCCESS INDUSTRIAL AUTOMATION SDN. BHD.
SJT SUCCESS INDUSTRIAL AUTOMATION SDN. BHD.
SJT SUCCESS INDUSTRIAL AUTOMATION SDN. BHD. Industrial Automation Products Distributor Malaysia, Electronic Components Supplier Malaysia, Industrial Parts Supply Malaysia ~ SJT SUCCESS INDUSTRIAL AUTOMATION SDN. BHD.
Contact Us flagMalaysia