|
Specifications |
|
VCHEK 1,2,3 |
|
Range |
6.000 V |
|
|
60.00 V |
|
|
600.0 V |
|
Resolution |
0.001 V |
|
|
0.01 V |
|
|
0.1 V |
|
Accuracy |
DC, 45 to 500 Hz:2.0 % + 3 |
|
|
500 Hz to 1 kHz: 4.0 % + 3 |
|
|
Diode test 4 |
|
Range |
2.000 V |
|
Resolution |
0.001 V |
|
Accuracy |
2.0 % + 3 |
|
|
Continuity4 |
|
Accuracy |
Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer |
|
|
Ω4 |
|
Range |
600.0 Ω |
|
|
6.000 kΩ |
|
|
60.00 kΩ |
|
Resolution |
0.1 Ω |
|
|
0.001 kΩ |
|
|
0.01 kΩ |
|
Accuracy |
0.9 % + 2 |
|
|
0.9 % + 1 |
|
|
0.9 % + 1 |
|
|
Capacitance4 |
|
Range |
1000 nF |
|
|
10.00 μF |
|
|
100.0 μF |
|
|
9999 μF |
|
Resolution |
1 nF |
|
|
0.01 μF |
|
|
0.1 μF |
|
|
1 μF |
|
Accuracy |
1.9 % + 2 |
|
|
1.9 % + 2 |
|
|
1.9 % + 2 |
|
|
100 μF - 1000 μF: 1.9 % + 2 |
|
|
> 1000 μF: 5 % + 20 |
|
Notes:
1 All VChek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other True-RMS meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
2 Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
3 Minimum measureable input in VCHEK autorange is 3 V dc. For measurements below 3 V dc, push Range button twice to get to 6 V dc manual range.
4 After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.
|
Specifications |
|
Maximum voltage between any terminal and earth ground |
|
|
Display |
|
|
3 3/4-digits, 6000 counts, updates 4/sec |
|
|
Operating temperature |
|
|
-10 °C to 50 °C (14 °F to 122 °F) |
|
|
Storage temperature |
|
|
-40 °C to 60 °C (-22 °F to 140 °F) |
|
|
Temperature coefficient |
|
|
0.1 x (specified accuracy)/°C (< 18 °C or > 28 °C) |
|
|
Operating altitude |
|
|
Storage altitude |
|
|
Relative humidity |
|
|
95 % to 30 °C |
|
|
75 % to 40 °C |
|
|
45 % to 50 °C |
|
|
Battery type |
|
|
9 Volt Alkaline, ANSI 1604A / IEC 6F22 |
|
|
Battery life |
|
|
Alkaline: 300 hours typical, without backlight |
|
|
Shock |
|
|
1 Meter drop per IEC 61010-1-2001 |
|
|
Vibration |
|
|
Per MIL-PRF-28800 for Class 2 instrument |
|
|
Size (HxWxL) |
|
|
167.1 mm X 85.1 mm X 46.0 mm (6.58 in X 3.35 in X 1.81 in) |
|
|
Weight |
|
|
Safety |
|
|
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004) and IEC/EN 61010-1 2nd Edition for measurement Category IV, 600 V, Pollution Degree 2, EMC EN61326-1 |
|
|
EMI regulations |
|
|
Complies with FCC Part 15, Class B |
|
|
Specifications |
|
VCHEK |
|
Input Impedance (Nominal) |
~3 kΩ < 300 pF |
|
|
VCHEK |
|
Common Mode Rejection Ratio (1 kΩ Unbalanced) |
> 60 dB at dc, 50 or 60 Hz |
|
|
Ω |
|
Open Circuit Test Voltage |
< 2.7 V dc |
|
Full Scale Voltage |
< 0.7 V dc |
|
|
Diode test |
|
Open Circuit Test Voltage |
< 2.7 V dc |
|
Full Scale Voltage |
2.000 V dc |
|
|
Ω |
|
Short Circuit Current |
< 350 μA |
|
|
Diode test |
|
Short Circuit Current |
< 1.0 mA |
|
|
|
|
|
Malaysia
