Autonics Multi-Functional Digital Indicators KN-2201W-Peak: Top Choice in Johor, Johor Bahru, JB, Malaysia IMS Mechatronics Sdn Bhd

Description

Autonics Multi-Functional Digital Indicators KN-2201W-Peak ( With Peak Mode Holding Function)

Main features

• High accuracy with 16bit ADC (±0.2% F.S.)

• Max. display range: 19999 to 19999

• Multi-input

: Thermometer 12 types, RTD 5 types, analog (mV, V, mA) 6 types

• Auto display color change function (for error or alarm)

• Various output options : 4EA or 2EA alarm output, 4-20 mA transmission output (isolated), RS485 communication output

Full output option model is available.

(alarm output 4EA + RS485 communication output + transmission output)

• Various functions

: High/Low peak monitoring, sensor break alarm output (burn-out), input correction, digital input (DI), user input range, display scale, transmission output scale, etc.

• Built-in power supply for sensor (24 VDC)

Specification Table

Series		KN-2000W
Power supply	AC voltage	100-240 VAC 50 to 60 Hz
	DC voltage	24 VDC
Allowable voltage range		90 to 110% of rated voltage
Power consumption	AC voltage	Max. 8 VA
	DC voltage	Max. 3 W
Display method		4 1/2 digit: 7 Segment LED Display (selectable red, green, yellow), character size : W10 mm x H17 mm
Input type	RTD	JPt100!&, DPt100!&, DPt50!&, Cu50!&, Cu100!& (5 types)
	Thermocouple	K, J, E, T, R, B, S, N, C (W5), L, U, PLII (12 types)
	Analog	• Voltage : ±1.0000 V, ±50.00 mV, ±200.0 mV, -1.000 V~10.000 V (4 types) • Current : 4.00~20.00 mA, 0.00-20.00 mA (2 types)
Digital input		• Contact input : Max. 2 k!& in ON,Max. 90 k!& in OFF • Non-contact input: Residual voltage max. 1.0 V in ON, Leakage current max. 0.03 mA in OFF • Outflow current: Approx. 0.2 mA
Sub output	Alarm output	2-point: Relay contact capacity 250 VAC 3 A 1c, 4-point: Relay contact capacity 250 VAC 1 A 1a
	Transmission output	ISOLATED DC 4-20 mA (PV transmission) load resistance max. 600!& (accuracy: ±0.2%F.S., resolution: 8000)
	Communication output	RS485 (Modbus RTU)
Display accuracy		±0.2% F.S. ±1digit (25±5) ±0.3% F.S. ±1digit (-10 to 20, 30 to 50) In case of thermocouple and below -100 input, [ ±0.4% F.S. ]±1digit TC-T, TC-U is min. ±2.0
Setting method		Set by front keys, or RS485 communication
Alarm output hysteresis		Set ON/OFF interval (1 to 999 digit)
Sampling cycle		Analog input: 100 ms, Temperature sensor input: 250 ms
Dielectric voltage		200 0VAC 50/60 Hz for 1 min. (between input terminal and power terminal)
Vibration		0.75 mm amplitude at frequency of 5 to 55 Hz (for 1 min.) in each of X, Y, Z directions for 2 hours
Relay life cycle	2-point	Mechanical: Min. 10,000,000, Electrical: Min. 100,000 (250 VAC 3 A resistance load)
	4-point	Mechanical: Min. 20,000,000, Electrical: Min. 500,000 (250 VAC 1 A resistance load)
Insulation resistance		Min. 100 M!& (at 500VDC megger)
Noise resistance		Square shaped noise by noise simulator (pulse width 1 3) ±2 kV
Memory retention		Approx. 10 years (non-volatile semiconductor memory type)
Environ- ment	Ambient temperature	-10 to 50, storage: - 20 to 60
	Ambient humidity	35 to 85%RH, storage: 35 to 85%RH
Approval		CE
Unit weight		Approx. 200 g

Caution For Your Safety

• For connecting the power, use a crimp terminal(M3.5, min. 7.2 mm).

• The connection of this unit should be separated from the power line and high voltage line in order to prevent inductive noise.

• Install a power switch or a circuit breaker to supply or cut off the power.

• Switch or circuit breaker should be installed nearby users for convenient control.

• Do not use this unit near the high frequency instruments (high frequency welding machine & sewing machine, large capacity SCR controller).

• When supplying input, if HHHH or LLLL is displayed, measured input may have problem. Turn off the power and check the line.

• Installation environment.

It shall be used indoor.

Pollution Degree 2

Altitude max. 2,000 m

Installation category

• It may cause malfunction if above instructions are not followed

More detail about IMS Mechatronics Sdn Bhd