Digital Earth Tester TES-1605: Top Choice in Malaysia, Selangor, Kuala Lumpur (KL) Obsnap Instruments Sdn Bhd

Description

Product Features

Capable of measuring earth voltage.
Data hold function.
Auto power off function:
The timer operates automatically about 10 minutes when the “ Test Button Switch ”are pressed to keep the tester power on.
2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.
Automatic warning when resistance of auxiliary earth spike is in excess of tolerance.
Designed to meet EN 61010-1/ / EN 61557 safety standard.
Zero ohm adjustment.

Specification

Measuring Range and Accuracy ( at 23℃ and 45-75%RH )

Current Consumption ( typical Value with battery voltage of 9V )

General Specification:

Safety Standard : EN 61010-1 overvoltage category Ⅲ,EN 61557.
Display : 3 1/2 digit liquid crystal display with a maximum reading of 1999.
Insulation Resistance : More than 5MΩ between the circuit and the housing case when measured with 300V_DC.
Withstand Voltage : 3700CV AC for 1 minute between the circuit and the housing case.
Timer (Auto power off) : about 10 minutes.
Dimensions : 165(L) ×100(W) ×57(H)mm
Weight : Approx. 500g (with battery).
Power Source : DC 9V (6´1.5V size “AA” battery or equivalent).
Over range Indication : “ 1- - - - ” will be shown on the LCD panel when out of range measurement is made.
Operating Temperature and Humidity : 0℃ to 40℃ (32℉ to 104℉) , below 80% RH.
Storage Temperature : -10℃to 60℃ (14℉ to 140℉)
Accessories : Test leads 1 set, Auxiliary earth spikes 2 pcs, Battery 6 pcs, Carrying case, Manual.