Model |
FP 10000Q |
General |
Number of amplifier channels |
4 |
Peak total output all channels driven |
10000 W |
Peak output voltage per channel |
150 V |
Max output current per channel |
50 A peak |
Max output power (all channels driven) |
2 ohms |
2500 W |
4 ohms |
2100 W |
8 ohms |
1300 W |
16 ohms |
660 W |
Max output power bridged |
2 ohms |
Not recommended 1 |
4 ohms |
5000 W |
8 ohms |
4200 W |
16 ohms |
2600 W |
Performance |
THD 20 Hz - 20 kHz at 1 W |
<0.1% |
THD at 1 kHz and 1 dB below clipping |
<0.05% |
Signal to Noise Ratio |
>112 dBA |
Channel separation (Crosstalk) at 1 kHz |
>70 dB |
Input impedance |
20 kOhm |
Common Mode Rejection (CMR) |
>54 dB, 20 Hz - 20 kHz |
Gain, Sensitivity and Limiters |
VPL, selectable per ch |
150, 121, 101, 83, 70, 56, 47, 38 V |
VPL, when bridged 2 |
300, 242, 202, 166, 140, 112, 94, 76 V |
Voltage Peak Limiter mode (per ch.) |
Hard / Soft |
Amplifier gain selectable (all channels) – rear-panel switches 2 |
23, 26, 29, 32, 35, 38, 41, 44 dB |
Default gain |
35 dB |
Level adjustment (per channel) |
Front-panel potentiometer, 31 position detented from -inf to |
Connectors and Buttons |
Output connectors (per ch.) |
Neutrik speakON |
Input connectors (per ch.) |
3-pin XLR, electronically balanced |
Output bridge mode |
A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source |
NomadLink network |
On board, 2 x RJ45 connectors IN and OUT |
Intelligent fans (on/off) |
Yes, depending on presence of output signal |
Power on/off and Remote enable on/off |
Individual switches on front-panel |
Cooling |
Dual fan, front to rear airflow, no filter required, temperature controlled speed |
Front-panel user interface |
Common |
NomadLink Network; Power Average Limiter (PAL)4; Power on |
Per channel |
Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute |
Power |
Operating voltage, 230 V / 115 V nominal 3 |
130-265 V / 65 -135 V |
Minimum power-up voltage, 230 V / 115 V |
171 V / 85 V |
Power Average Limiter (PAL) 4 |
Yes |
Soft-start / Inrush Current Draw |
Yes / max. 5 A |
Mains connector |
230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock |
Dimensions |
Dimensions |
W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”) |
Weight |
Weight |
12 kg (26.4 lbs) |
Finish |
Finish |
Black painted steel chassis with black painted steel / aluminum front |