MG20

Category: MG Series Analog Mixing Consoles Available
For more information, visit our official website at hiumusical.com

Description

                                                YAMAHA MG20 FEATURES

I/O Phantom power +48V
Input Channels Mono[MIC/LINE] 12
Mono/Stereo[MIC/LINE] 4
Output Channels STEREO OUT 2
MONITOR OUT 1
PHONES 1
AUX SEND 4
GROUP OUT 4
Bus Stereo: 1, GROUP: 4, AUX: 4
Input Channel Function PAD 26 dB(Mono)
HPF 80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking
EQ LOW Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED LED turns on when post EQ signal reaches 3 dB below clipping(Mono)
Level Meter 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]

                                                   General specifications

Total harmonic distortion 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min
Frequency response +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level Equivalent input noise -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Residual output noise -102 dBu (STEREO OUT, STEREO master fader: Min)
Crosstalk -78 dB
Power requirements AC 100 – 240 V, 50 / 60 Hz
Power consumption 36 W
Dimensions W 444 mm (17.5')
H 130 mm (5.1')
D 500 mm (19.7')
Net weight 6.9kg (15.2 lbs.)
Accessories Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Rack-mount kit
Others Operating Temperature: 0 to +40˚C


 

                                     MG20 Analog Input Characteristics

Input terminal PAD 
26 dB
GAIN Trim 
Position
Actual Load 
Impedance
For Use With 
Nominal
Input level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE 
1 – 12
OFF +64 dB 3kΩ 50-600Ω 
Mics/Lines
-80 dBu 
(0.077 mV)
-60 dBu 
(0.775 mV)
-40 dBu 
(7.75 mV)
Combo 
jack*2 
(Balanced)
+20 dB -36 dBu 
(12. 3 mV)
-16 dBu 
(122.8 mV)
+4 dBu 
(1.228 V)
ON +38 dB -54 dBu 
(1.55 mV)
-34 dBu 
(15.46 mV)
-14 dBu 
(154.6 mV)
-6 dB -10 dBu 
(245 mV)
+10 dBu 
(2.451 V)
+30 dBu 
(24.51 V)
MIC 
13/14 – 19/20
- +64 dB 3kΩ 50-600Ω 
Mic
-80 dBu 
(0.077 mV)
-60 dBu 
(0.775 mV)
-40 dBu 
(7.75 mV)
XLR-3-31 *3
(Balanced)
+20 dB -36 dBu 
(12. 3 mV)
-16 dBu 
(122.8 mV)
-6 dBu 
(388.2mV)
LINE 
13/14 – 15/16
- +38 dB 10kΩ 600Ω 
Lines
-54 dBu 
(1.55 mV)
-34 dBu 
(15.46 mV)
-14 dBu 
(154.6 mV)
Phone jack *5 
(Unbalanced)
-6 dB -10 dBu 
(245 mV)
+10 dBu 
(2.451 V)
+30 dBu 
(24.51 V)
LINE 
17/18 – 19/20
- +38 dB 10kΩ 600Ω 
Lines
-54 dBu 
(1.55 mV)
-34 dBu 
(15.46 mV)
-14 dBu 
(154.6 mV)
RCA Pin 
(Unbalanced)
-6 dB -10 dBu 
(245 mV)
+10 dBu 
(2.451 V)
+30 dBu 
(24.51 V)

                                     MG20 Analog Output Characteristics

Output Terminals Actual source 
impedance
For Use With 
Nominal
Output level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu 
(1.228 V)
+24 dBu 
(12.28 V)
XLR-3-32 *3 
Phone jack *4 
(Balanced)
MONITOR OUT [L, R] 
GROUP OUT [1 - 4] 
AUX SEND [1 - 4]
150Ω 10kΩ Lines +4 dBu 
(1.228 V)
+20 dBu 
(7.750 V)
Phone jack *4 
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

Indent Order


More detail about HMI Audio Visual Sdn Bhd
HMI Audio Visual Sdn Bhd
HMI Audio Visual Sdn Bhd Musical Instrument supplier Johor Bahru, JB, Lighting & Karaoke System ~ HMI Audio Visual Sdn Bhd
Contact Us flagMalaysia