XR Series 2 kW to 10 kW: 马来西亚的首选 ELSO Technologies Sdn Bhd

详情

Features
High Frequency IGBT-based Switch-Mode Design

The XR Series utilizes the latest IGBT devices to drive down size and increase performance. The high frequency design delivers fast transient response and low output ripple. This performance coupled with Magna-Power's rugged current-fed power processing, enables confidence in even the most demanding applications.

Fully Programmable Power

All XR Series functions and features of are available and programmable from a variety of control methods, including:

Stepless front panel knobs
37-pin isolated analog-digital I/O
Computer interface with software and drivers

Various programming interfaces are available, such as LXI TCP/IP Ethernet (+LXI), IEEE-488 GPIB (+GPIB), Edgeport USB, Accessory (+USB), RS485 Accessory (+RS485).

Model Ordering Guide

Models Chart

The following chart details the available standard XR Series models. The Current Maximum (Adc) column is separated by the available power levels. To determine the appropriate model, first select your output Voltage Maximum (Vdc) to find appropriate row. Next, select one desired Current Maximum from the row that contains your desired Voltage Maximum. Then, construct your model number according to the model ordering guide, above. Non-standard voltage and current configurations are available.

2 kW	4 kW	6 kW	8 kW	10 kW
Voltage Maximum	Current Maximum					*Ripple (mVrms)**	Efficiency (%)
5	375	600	N/A	N/A	N/A	50	86
10	200	375	600	N/A	N/A	50	86
16	125	250	375	500	600	50	86
20	100	200	300	375	500	45	86
25	80	160	240	320	400	45	86
32	62	124	186	250	310	40	86
40	50	100	150	200	250	40	87
50	40	80	120	160	200	50	87
60	33	66	100	133	166	60	87
80	25	50	75	100	125	60	87
100	20	40	60	80	100	60	87
125	16	32	48	64	80	100	87
160	12	24	36	50	60	120	87
200	10	20	30	40	50	125	87
250	8	16	24	32	40	130	88
300	6.6	13.2	19.8	26.4	33.3	160	88
375	5.3	10.6	15.9	21.3	26.5	170	88
400	5.0	10.0	15.0	20.0	25	180	88
500	4.0	8.0	12.0	16.0	20	220	88
600	3.3	6.6	9.9	13.3	16.5	250	88
800	2.5	5.0	7.5	10.0	12.5	300	88
1000	2.0	4.0	6.0	8.0	10	350	88
1250	1.6	3.2	4.8	6.4	8.0	375	88
1500	1.3	2.6	4.0	5.3	6.6	400	88
2000	1.0	2.0	3.0	4.0	5.0	450	88
4000	0.50	1.00	1.50	2.00	N/A	6500	88
6000	0.30	0.66	1.00	1.33	N/A	7500	88
8000	0.25	0.50	0.75	1.00	N/A	8500	88
10000	0.20	0.40	0.60	0.80	N/A	9500	88
	Input Current Per Phase (Aac)
208/240 Vac, 1Φ	16	N/A	N/A	N/A	N/A
208/240 Vac, 3Φ	8	15	22	29	36
380/415 Vac, 3Φ	5	9	13	17	21
440/480 Vac, 3Φ	4	8	11	15	18

Specifications

Input Specifications
Nominal Voltage 3 phase, 3 wire + ground	208 VAC (operating range 187 - 229 VAC) 240 VAC (operating range 216 - 264 VAC) 380 VAC (operating range 342 - 440 VAC) 415 VAC (operating range 373 - 456 VAC) 440 VAC (operating range 396 - 484 VAC) 480 VAC (operating range 432 - 528 VAC)
1 phase, 2 wire + ground (2 kW models only)	208 VAC (operating range 187 - 229 VAC) 240 VAC (operating range 216 - 264 VAC)
Frequency	50 Hz through 400 Hz
Power Factor	Greater than 92% at maximum power

Output Specifications
Ripple	See Model Charts
Line Regulation	Voltage Mode: ± 0.004% of full scale Current Mode: ± 0.02% of full scale
Load Regulation	Voltage Mode: ± 0.01% of full scale Current Mode: ± 0.04% of full scale
Load Transient Response	2 ms to recover within ±1% of regulated output with a 50% to 100% or 100% to 50% step load change
Efficiency	≥ 86% (See Model Charts)
Stability	± 0.10% for 8 hrs. after 30 min. warmup
Isolation	User inputs and outputs: referenced to earth ground Maximum input voltage to ground: ±2500 Vac Maximum output voltage to ground: Models ≤1000 Vdc: ±1000 Vdc Models >1000 Vdc and ≤2000 Vdc: ±(2000 Vdc + Vo/2) Models >2000 Vdc: No output isolation, specify positive or negative output polarity
Maximum Slew Rate	Standard Models: 100 ms for an output voltage change from 0 to 63%, 100 ms for an output current change from 0 to 63%. With High Slew Rate Option (+HS) and models > 2000 Vdc: 4 ms for an output voltage change from 0 to 63%, 8 ms for an output current change from 0 to 63%.
Bandwidth	Standard Models: 3 Hz with remote analog voltage programming, 2 Hz with remote analog current programming. With High Slew Rate Option (+HS) and models > 2000 Vdc: 60 Hz with remote analog voltage programming, 45 Hz with remote analog current programming.

Physical Specifications
Power	Size (H" x W" x D")	Rack Units	Weight
2 kW	3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96)	2U	45 lbs (20.41 kg)
4 kW	3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96)	2U	47 lbs (21.32 kg)
6 kW	3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96)	2U	48 lbs (21.77 kg)
8 kW	3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96)	2U	48 lbs (21.77 kg)
10 kW	3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96)	2U	48 lbs (21.77 kg)

Control Specifications
Voltage Programming Accuracy	± 0.075% of full scale voltage
OVT Programming Accuracy	± 0.075% of full scale voltage
Current Programming Accuracy	± 0.075% of full scale current
OCT Programming Accuracy	± 0.075% of full scale current
Voltage Readback Accuracy	± 0.2% of full scale voltage
Current Readback Accuracy	± 0.2% of full scale current
External Analog Programming and Monitoring Levels	0 - 10 Vdc
External Analog Output Impedances	Voltage output monitoring: 100 Ω Current output monitoring: 100 Ω +10 Vdc reference: 1 Ω
External Digital Programming and Monitoring Limits	Input: 0 to 5 Vdc, 10 kΩ input impedance Output: 0 to 5 Vdc, 5 mA drive capacity
Remote Sense Limits	3% maximum voltage drop from output to load

Environmental Specifications
Ambient Operating Temperature	0°C to 50°C
Storage Temperature	-25°C to +85°C
Humidity	Relative humidity up to 95% non-condensing
Temperature Coefficient	0.04%/°C of maximum output voltage, 0.06%/°C of maximum output current.
Air Flow	Side air inlet, rear exhaust

更多 ELSO Technologies Sdn Bhd 相关资料

XR Series 2 kW to 10 kW

Features High Frequency IGBT-based Switch-Mode Design

Fully Programmable Power

Model Ordering Guide

Models Chart

Specifications

Features
High Frequency IGBT-based Switch-Mode Design