Hard anodized rectangular transfer valve: 马来西亚的首选 Glovac Sdn Bhd

详情

rectangular-transfer-valve-hard-anodized

Hard anodized rectangular transfer valve technical data

Spindle sealing	Bellows
Life Cycle	1,000,000 cycles
leak rates	Body	5 x 10^-6 mbar.l/s
Surface Treatment	Hard anodized
Bakeable Temperature	Body	<90℃
	Drive member	<60℃
Differential pressure on the gate(Note*)	Positive pressure difference	≦ 120KPa
	Reverse pressure difference	≦ 100KPa
Differential pressure at opening(Note**)	<10 mbar(0.01bar)
Pressure Range	1* 10^-6 mbar to 1.0 bar
Drive mode	Pneumatic 5~7 Kg/cm²
Standard Seal	Gate	Viton® O'ring
Open/Close sensor (Standard)	DC4-24(V) or AC4-240(V), 5-40 ma
Solenoid Power (Optional)	DC24(V) ,AC24(V),AC110(V),AC220(V)
Mounting position	Actuator up or down

Note:

(* ) Differential pressure on the gate

Positive and negative pressure difference definitions:

Positive pressure difference ( P1 > P2) = P1-P2

Reverse pressure difference (P1 < P2) = P2-P1

(**) Differential pressure at opening = P1 – P2 < 10 mbar(0.01bar)
rectangular transfer vacuum valve

32x222　M8x50L
46x236　M8x50L
50x336　M8x60L
46x496　M8x70L

PIN
Φ10x15L

Clamp single
clamp AL

Part No:2121A211

Maintenance of the fixture

Part No: GR03A213323