详情
Epoxy Fix Super Fast is a quick-setting, two-part epoxy resin adhesive. Super Fast provides strong adhesive suitable for bonding most materials in common use. Super Fast sets in approximately 5 minutes and after this time bond strength is usually sufficient for handling. No undue strain should be applied to the bond for 30 minutes. Very high bond strength is attained after 16 hours.
Features
-
Bonds in 5 minutes
-
Dries clear
-
Fills gaps for uneven or not perfect fit surfaces
Ideal for
-
Porcelain
-
Metal
-
Wood
-
Marble
-
Concrete
-
Pottery
-
Rigid plastics
Direction
-
Surfaces to be repaired should be clean, dry and free from grease. For best adhesion, scrape and sand the surfaces and clean with acetone.
-
Unscrew caps of each tube and pierce with own cap to avoid contamination. Dispense equal amount of resin and hardener (Part A and B) onto a clean disposable surface and mix thoroughly. The mixture will remain usable for 3 – 4 minutes.
-
Apply surfaces to be repaired and allow to harden.
-
To reseal, wipe nozzles clean and replace caps to original tube (colour coded), or hardening may occur in tube nozzle.
Safety tips
-
Avoid contact with eyes and skin and avoid breathing its vapour. Wear eyes protection and gloves when mixing and using
-
If poisoning occurs, contact a doctor.
-
If swallowed, DO NOT INDUCE VOMITING. Give a glass of water.
-
If skin contact occurs, remove contaminated clothing and wash skin thoroughly.
-
If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor.
更多 Safety Solutions (M) Sdn Bhd 相关资料
Malaysia
