About TAKISAWA LA-300/300M/300Y
| ITEMS | UNIT | LA-300 | LA-300 M | LA-300 Y | ||||
| CAPACITY | Maximum Swing | mm | 580 | 580 | 580 | |||
| Std Turning Dia | mm | 300 (T10) | 244 | 244 | ||||
| Max Turning Dia | mm | 450 | 420 | 350 | ||||
| Max Turning Length | mm | 1086 (P Motor) | 1052 (P Motor) | 1065 (P Motor) | ||||
| mm | 1086 (Gear Box) | 1052 (Gear Box) | 1065(Gear Box) | |||||
| Max Bar Work Capacity | mm | 90 | 90 | 90 | ||||
| TRAVEL | X-Axis Travel | mm | 255 | 255 | 220 | |||
| Z-Axis Travel | mm | 1,200 | 1,200 | 1,200 | ||||
| SPINDLE | Spindle Speed | rpm | 2,800 | 2,800 | 2,800 | |||
| Chuck Size | 12” (15”) | - | - | |||||
| Spindle Nose | A2-8 | A2-8 | A2-8 | |||||
| Through Hole Dia | mm | 102 | 102 | 102 | ||||
| Bearing Dia | mm | 140 | 140 | 140 | ||||
| TURRET | Number Of Turrent | T10 | T12 | T12 | ||||
| Turning Tool Shank | mm | 25 | 25 | 25 | ||||
| Boring Bar Shank Dia | mm | 50 | 40 | 40 | ||||
| TAILSTOCK | Tailstock Travel | mm | 1,130 | 1,130 | 1,130 | |||
| Tailstock Spindle Dia | mm | 150 | 150 | 150 | ||||
| Taper Hole Of Tailstock Spindle | MT.5 | MT.5 | MT.5 | |||||
| Tailstock Spindle Travel | mm | 150 | 150 | 150 | ||||
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 16 | 16 | 16 | |||
| Z-Axis Rapid Traverse Rate | m / min | 20 | 20 | 20 | ||||
| Y-Axis Rapid Traverse Rate | m / min | - | - | 8 | ||||
| MOTOR | Spindle Drive Motor | kw | 18.5/15 | 18.5/15 | 18.5/15 | |||
| Turret Index Motor | kw | 1.2 | 1.2 | 1.2 | ||||
| X-Axis Drive Motor | kw | 1.8 | 1.8 | 2.5 | ||||
| Z-Axis Drive Motor | kw | 2.5 | 2.5 | 2.5 | ||||
| SIZE | Height | mm | 1,960 | 1,960 | 2,095 | |||
| Width | mm | 3,682 | 3,682 | 3,682 | ||||
| Depth | mm | 1,803 | 1,803 | 1,810 | ||||
| Weight | kg | 7,550 | 7,600 | 9,400 | ||||
| •Specification is subject to change without further notice. | ||||||||
Malaysia
