HFC Series

1. Cuniform block is adopted in the interior of the air gripper to afford larger gripper force.

2. The bumper is adopted in the front of piston, which can reduce the noise of metal bump.

3. A positioning hole is attached to the bottom of the body,
    which can improve the  precision and  the consistency  of repeated dismounting and  positioning.    

4. Precision repeating snatch which adopted roboticized equipment.

5. Kinds of series and styles for you to choice which snatch multiform workpiece. 

1. Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.

2. Don't use the air gripper under strong external force and impact force.

3. When install and fix  the air gripper, avoid falling down, collision and damage.

4. When fixing  the gripping jaw parts, don't twist  the gripping jaw.

5. There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it  will cause the position deviation and fall.