Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) (DKG810): 马来西亚的首选 Renetech Sdn Bhd

详情

Reduced heating time to 1/2.5, cooling time to 1/4 (compared with conventional company products), horizontal air flow appropriate for loaded operation, the standard oven for production lines supporting multi power supplies. The product lineup includes a silicon free type.

Features of Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) (DKG810)

Standard oven with simple operation whose temperature increase and decrease time has been improved 50% or more compared with conventional products to reduce product takt time.
Temperature increase time has been reduced up to 1/2.5 (at no load, compared with conventional company products), temperature decrease time has also been reduced to 1/4 (at no load, compared with conventional company products). Extensive increase in work efficiency is expected.
Employment of a total exhaust system in which air supply and discharge are linked by operation of the manual damper at the front realizes extensive reduction in temperature decrease time.
The horizontal air flow system ideal for processing samples in a magazine rack or a lot of samples realizes high precision temperature performance even at loaded condition.
Fluoro rubber is employed for shoulder packing to realize silicon free. (DKG610V/650V/810V/850V)

Product lineup includes 610/610V/810/810V for 200 to 220V power supply and 650/650V/850/850V for 230 to 300L 240V to support multiple power supplies.

Specifications

Item Code	212888
Model	DKG810
Method	Forced convection
Operating temperature range	Room temp. +30°C to 260°C
Temperature adjustment accuracy	±0.5℃
Temperature distribution accuracy	±2℃（at 200℃）、±2.5℃（at 260℃）
Time to attain max. temp.	Within 50min. from 25°C ->260°C
Temp. decrease time	About 40min. from 260°C ->50°C
Air supply/exhaust damper	Front operation/manual damper Air supply pipe/exhaust pipe at the rear NSSC180 With exhaust duct
Interior/exterior	Stainless steel plate/chrome free electro galvanized steel plate Chemical proof baking finish
Heater and heat insulator	SUS pipe heater & glass wool
Heater capacity	200 to 220V 3.6 to 4.36kW
Blower fan	Sirocco fan×2
Fan motor	Capacitor 30W×2
Cable port	I.D.: 30mm One at the right side of the main body
Door packing	Silicon rubber
Air supply port	Bottom of heater room (Open/Close with a manual damper)
Damper control	Linked air supply / Exhaust with manual knob on the front of the main body
Exhaust port	Upper part of rear of the main body: φ80 (Open / Close with a manual damper)
Heater control	SSR control
Sensor	K-thermocouple (Both for inside the chamber and heater room)
Safety unit	Self diagnostic function (Temperature sensor error, Heater disconnection, SSR short-circuit, Automatic overheat prevention function), Key lock,
Safety unit	Program lock, Overheat preventive device, Over current electric leakage breaker, Door switch, Temperature fuse, External alarm terminal
Internal dimensions（W×D×H mm）	600×500×1000mm
External dimensions（W×D×H mm）	770×696×1674mm
Withstand load of shelf	15 kg / pc.
Shelf support step number	15 steps
Shelf support pitch	60mm pitch
Accessories Shelf	4 pcs.
Accessories Shelf support	8 pcs.
Power Source	AC200 to 220V 18.5-20.5A Single-phase
Weight	155kg
Remarks(dimensions)	300L

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)

External dimensions do not include protrusions.

更多 Renetech Sdn Bhd 相关资料