Forced Convection Oven (Energy Saving) (DNE411): 马来西亚的首选 Renetech Sdn Bhd

详情

High-performance, energy-saving, programmble constant temperature, forced convection ovens.

Features of Forced Convection Oven (Energy Saving) (DNE411)

Due to high precision control system, high performance temperature control is realized, and the CO2 discharge, power discharge also displayed at the monitor.
The DNE series represents forced convection constant temperature oven. They achieve an energy-saving rate of 30 to 40% compared to previous models.

Available Various Functions

Incorporates with maximum 99 steps, 99 patterns program controller with repeat function.
Loaded with total operation hours timer.

Data acquisition from internal test device is easy because of cable holes.

Specifications

Item Code	212819
Model	DNE411
Temp. adjustment accuracy	±0.5°C (at 210°C)
Temp. distribution accuracy	±2.0°C (at 210°C)
Max. temp. reaching time	Approx. 60 min.
Interior/Exterior material	Stainless steel /Electro-galvanized steel sheet with epoxy and melamine resin baking finish
Operation function	Fixed temperature operation, Program operation, Auto start, Auto-stop, Quick automatic stop
Program mode	Program operation; Maximum 32 steps, Repeat function
Additional functions	Timer Function (Actual Timer within 24hrs.), Total operation hours timer (to 65535hrs.), Calendar time ( 24 hours),
Shelf plate with standard load	Approx. 15kg/piece
Heat insulating material	Glass wool
Heater	Stainless pipe heater
Heater	1.1kW
Fan Type	Scirocco fan
Motor	Condenser type,10W
Cable hole/Air in-take hole	33mm I.D. (the right side) 1pc.
Temp. controller	PlD Z control by microprocessor
Temp. setting method	Digital setting by UP/DOWN key
Temp display method	Digital Display by Green LED
Timer/Min.division	0 min. to 99 Hrs. 59 min. /1 min.
Additional functions	Calibration offset, Power discharge, CO2 discharge, Power failure return mode, User configuration information
Heater circuit control	Triac zero-cross control
Safety countermeasures	Self diagnosis functions (Temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention),
Safety countermeasures	Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
Shelf support step number	11 steps
Shelf support pitch	30 mm
Accessories Shelf plate	Stainless steel, 2 pcs.
Accessories Shelf support	4 pcs. (1 pair - 2 pcs. is fixed)
Method	Forced air circulation
Operating temperature range	Room temp. +20 to 210°C
Internal dimensions（W×D×H mm）	450×450×450mm
External dimensions（W×D×H mm）	580×645×860mm
Remarks(dimensions)	90L
Power Source	AC220V 6A Single-phase
Weight	63kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)

External dimensions do not include protrusions.

更多 Renetech Sdn Bhd 相关资料