| Item Code | 212612 |
|---|---|
| Model | DT411 |
| Temp. distribution accuracy | ±4.0°C (at 360°C) JTM K05 |
| Max. temp. reaching time | Approx. 80 min. |
| Heater | Stainless pipe heater |
| Cable hole | 33mm I.D. ×1 |
| Timer | 1 min. to 99 Hrs. 59 min |
| Operation function | Fixed temp., Auto-start, Auto-stop, Quick auto stop, program (Max.99 steps, 99 patterns, repeat) |
| Circulation method | Forced air circulation |
| Operating temperature range | Room temperature +30~360°C |
| Temp. adjustment accuracy | ±0.3°C (at 360°C) JTM K05 |
| Temp. fluctuation | ±0.5°C (at 360°C) JIS |
| Temp. gradient | ±20°C(at 360°C) JIS |
| Clean level | Class 100 (when the temperature is stable) |
| Interior | Stainless steel |
| Exterior material | Cold rolled steel plate with melamine resin baking finish |
| Fan type | Sirocco fan, Condenser type motor |
| Differential pressure meter | Analog type (0~300 Pa) |
| Exhaust port | 61mm O.D.×1 |
| Filter | Heat resistant HEPA filter (dust collect : more than 99.97% at 0.3μm ) |
| Caster | Wheel Dia. 50mm anti-fouling caster |
| Temp. controller | PID control by micro processor |
| Temp. setting method | Digital setting with UP/DOWN key |
| Temp display method | Digital display |
| Other display | Operation monitor (operation condition graphic display by LED patterns) |
| Additional functions | Calendar timer (max. 24 Hrs.), Calibration off-set function, Integration time (max. 65535Hrs.), Display the amount of power consumption/CO2 discharge/Heater operation amount, Power failure recovery mode, User setting information save and recall |
| Heater circuit control | Triac zero-cross control |
| Temp. sensor | K-thermocouple (double sensor) |
| Safety countermeasures | Self diagnosis functions (Sensor, Fan, Heater, Relay, Triac, Automatic overheat prevention), Independent overheat prevention, Key lock function, Electric leakage breaker, Door switch, Reverse phase protection |
| Shelf support step number | 12 steps |
| Accessories Shelf plate | Stainless steel, 2 pcs |
| Accessories Shelf support | 4 pcs |
| Internal dimensions（W×D×H mm） | 450×450×450mm |
| External dimensions（W×D×H mm） | 700×1025×1570mm |
| Remarks(dimensions) | 91L |
| Power Source |
AC220V 5A Three phase |
| Weight | 200kg |
Malaysia
