| Item Code | 212039 |
|---|---|
| Model | DX302 |
| Method | Natural gravity convection |
| Operating temp. range | Room temp.＋5～300℃ |
| Temp. control accuracy | ±1℃（at 300℃） |
| Temp. distribution accuracy | ±10℃（at 300℃） |
| Max. temp. reaching time | Approx. 45 min (Room temp. to 300°C) |
| Interior material | Stainless steel |
| Exterior material | Electro-galvanized steel sheet with melamine resin baking finish |
| Heat insulating material | Glass wool |
| Heater | Iron-chrome wire heater, 0.9 kW |
| Exhaust port | 33 mm I.D. ×2 pcs. (on top) |
| Temp. controller | PID control by microprocessor |
| Temp. setting method | Digital setting by UP/DOWN key |
| Temp. display method | Measurement temp. : Digital display by green LED Setting temp. : Digital display by red LED |
| Timer | 1 min. to 99 hrs. 59 min. and 100 hrs. to 999 hrs. 50 min. |
| Operation function | Fixed temperature operation, Quick auto stop, Auto stop, Auto start |
| Additional function | Calibration off-set, Power failure compensation function, Key lock function |
| Heater circuit control | SSR control |
| Sensor | K-thermocouple |
| Safety device | Self diagnosis functions(Temp. sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, |
| Safety device | Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection. |
| Shelf plate with standard load | 15kg/piece |
| Shelf support step number/pitch | 6 steps / 35mm |
| Accessories | Stainless steel punching metal Shelf plate 2pcs. Shelf bracket 4pcs. |
| Internal dimensions（W×D×H mm） | 300×310×300mm |
| External dimensions（W×D×H mm） | 400×440×630mm |
| Remarks(dimensions) | 28L |
| Power Source |
AC220V 5A Single-phase |
| Weight | 23kg |
Malaysia
