Low Temperature Incubator (Programmable, Peltier Cooling) (IJ201): 马来西亚的首选 Renetech Sdn Bhd

详情

Fixed Temp. Incubator from small to large capacity, high functional and best-selling for long years

Features of Low Temperature Incubator (Programmable, Peltier Cooling) (IJ201)

Highly functional fixed temp. incubator with varying capacity.
A compact model ideal for preserving samples and for constant temperature testing
A CFC-free, low-vibration model with a cooler equipped with peltier elements
Uses a programmable temperature controller (IJ201/300)
Has a convenient pre-reset temperature function ( as an option)
Air jacket can be attached as an option
Two units can be stacked by the stacking support (Option)
The IJ101W observation window uses environmentally friendly glass made from combination of energy-saving pair glsass and half-tempered glass, which prevents wasteful heat loss
A sliding mounting table can be provided with the IJ300 model ( as an option) for convenience when setting a microshaker inside and when adding / removing samples. The service outlet on the side of the unit does not require any wiring. A shaker cannot be set in the IJ101W model.

Safety has been enhanced with the addition of a self-diagnostic function, an overheat prevention device and an over-current circuit breaker.

Specifications

Item Code	221158
Model	IJ201
Type	Forced convection
Operating Temperature Range	5～60℃（at room temp.25℃）
Temp. Control Accuracy	±0.5℃（at 37℃）
Temp. Distribution Accuracy	±1.0℃（at 37℃）
Time to Max. Temp.	20～60℃　50min.
Time to Lowest Temp.	20～0℃　120min.
Interior	Stainless steel
Exterior	Chrome free electronic galvanized plated steel plate chemical proof baking finish
Heat Insulator	Urethane foam
Heater	Pipe heater 150W
Condenser	Peltiert element, Forced radiation type
Temp. Control Method	PID
Operation Function	Program operation (30 steps x 1, 15 steps x 2, 10 steps x 3), Fixed operation, Quick auto-stop, Auto-stop, Auto-start operation
Additional Functions	Calibration off-set, Key-lock function, Auto recovery function at power failure
Sensor	Double sensor: Platinum resistance Pt 100Ω (Temp. controller), K-thermocouple(Overheat preventor)
Safety Functions	Self-diagnostic function(Temp. sensor error, heater failure, SSR short-circuit, Auto overheat), Overheat prevention(IJ201/301), Liquid pressure overheat preventor, Over-current ELB, Main relay error
Shelf Loading Capacity	Approx. 15kg/ shelf
Shelf Step	8 steps
Accessories	Shelf(Stainless punching metal) 2pcs., Shelf support 4 pcs., Receiver for drain 1pc.
Temp. Setting Method	Dedicated operation menu key and digital setting by UP/DOWN key
Internal dimensions（W×D×H mm）	300×300×300mm
External dimensions（W×D×H mm）	580×417×437mm
Remarks(dimensions)	27L
Power Source	AC115/220V single phase with step-down transformer
Weight	25kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)

External dimensions do not include protrusions.