Benchtop Steam Sterilizer (Laboratory Use) (SK101C): 马来西亚的首选 Renetech Sdn Bhd

详情

Space-saving, low cost benchtop sterilizer, ideal for research facilities

Features of Benchtop Steam Sterilizer (Laboratory Use) (SK101C)

Sterilizer with an 18 liter chamber for research processes and areas that are limited in space. High pressure steam is the most widely used method for sterilization due to its speed, reliability, and effectiveness. Newly designed small capacity sterilizers provide a safe, reliable high pressure steam sterilizing environment within a self-contained unit that is particularly easy to use. This sterilizer is ideal for a wide range of applications.
Benchtop size - 18 Liter
Powerful 1500W pipe heater
Easy to read 4 digit LED display
Built in Drain Valve for easy cleaning
Programmable sterilizing and temperature functions
Timer Setting Range 0 to 999 min.
Space-saving
Standard equipped with calibration offset, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO2 emission, and heat output, save and access operator setting information
Water level detection sensor with alarm
Overheat Protection Sensor
Lid closure sensor (Inter lock)
Pressure Lamp Indicator
Increased chamber wall thickness (2mm)
New improved silicon lid gasket and easy to replace

Specifications

Model	SK101C
Temp. setting range	50 to 126°C
Heater	1500W stainless steel heating pipe
Timer	0 min. to 999 min.
Safety device	Pressure safety valve, Low water sensor, Dual exterior walls,
System	Automatic high pressure steam sterilizer
Max. operational pressure	0.142MPa (at 126oC)
Interior Material	Stainless steel SUS 304
Temp. controller	PlD control by microprocessor
Temp. setting method	Digital setting by ▲/▼ keys
Temp display method	Digital display by green LED
Accessories	1 stainless steel mesh basket (254mm×240mm) and stainless steel bottom
Internal dimensions（W×D mm）	343×550mm
External dimensions（W×D mm）	280×275mm
Remarks(dimensions)	Internal capacity　18L
Power Source	AC115V 15A
Weight	17.5kg

Maintenance and warranty

Yamato autoclaves are for laboratory use only. They cannot be operated for medical use.
The pressure vessel conforms to the safety standards in Japan. Any clarification or modification works to meet the local safety standards in each country shall be out of the manufacturer’s scope.
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.