| Item Code | 212737 |
|---|---|
| Model | ADL311-A |
| Temp. adjusting unit setting range | 40 to 220deg.C (inlet temperature), 0 to 60deg.C (outlet temperature) |
| Temperature adjusting accuracy | Inlet temperature±1deg.C |
| Drying air amount adjusting range | 0〜0.7m3/min |
| Spray air pressure adjusting range | 0〜0.3MPa |
| Liquid sending pump flow rate range | 0〜26 ml/min |
| Spray air line washing function | Spraying at the nozzle tip, manual pulse jet system |
| External output | Inlet temperature, outlet temperature, temperature outlet (4-20 mA) |
| Temperature adjusting device | PID digital temperature adjusting device |
| Touch panel | Blower, heater, liquid sending pump, pulse jet switch, error display |
| Control select switch | Inlet temperature, outlet temperature control switch (Outlet temp. control is conditional.) |
| Temperature sensor | K-thermocouple |
| Heater | 2.0 kW (at 200V) to 2.88 kW (at 240V) |
| Liquid sending | Fixed amount peristaltic pump |
| Spraying air pump | Spraying air compressor (sold separately) is used |
| Service outlet | For stirrer: AC100V, MAX2A |
| Suction blower | Bypass blower |
| Filter | Suction filter, exhaust filter |
| Recovery of solvent | - |
| Spray nozzle cooling mechanism | Connector: nipple x 2, O.D.:φ10.5 mm |
| Spray air connection diameter | Nipple diameter:φ7 mm |
| Spray air pressure | Bourdon tube: 0.3 MPa |
| Exhaust connecting diameter | φ50mm |
| Safety function | Inlet/outlet temperature overheat, sample feed reverse rotation mechanism, over current electric leakage breaker, nozzle connection error |
| External dimensions（W×D×H mm） | 580×420×1125mm |
| Power Source |
AC115/220VV AC115/220V Single phase |
| Weight | 80kg |
Malaysia
