Control Techniques Digitax HD M751 Base

Base servo drive for configuration flexibility

Digitax HD M751 Base servo drive offers configuration flexibility with two option slots for functionality extension and customization.

With built-in RS485 communications, Digitax M751 also features an on-board Advanced Motion Controller for distributed 1.5 axis motion control.

• Features

  Maximum performance

  • 300% peak current performance pulse-duty overload
  • Optimized control loops for high dynamic performance
    • 62.5 μs current loop
    • 250 μs position and speed loop
  • Up to 16 kHz switching frequency
  • Supports a wide range of feedback technologies including Quadrature, SinCos (including absolute), SSI, BiSS, EnDat (up to 4 Mb with EnDat 2.2) and resolvers
  • Maximum performance package with high torque density, low inertia Unimotor hd servo motors
  • Analog and pulse/direction control for centralised motion
  • Advanced 1.5 axes Motion Controller, key features include:
    • Real-time tasks
    • 250 μs cycle time
    • Motion profile generator
    • Electronic gearbox
    • Interpolated CAM
    • 2Homing functions
    • High speed position freeze

  
  

  Minimum size

  • 40 mm drive width and option bracket adds 22 mm, providing a highly competitive maximum drive width of 62 mm
  • Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard).
  • Fits into cabinets just 200 mm deep

  
  

  Easy installation and setup

  • DIN rail alignment
  • Kits for easy multi-axis installation
  • Single motor cable and electronic motor name plate for fast set up
  • Seamless motor-drive pairing with Unimotor hd servo motors
  • Easy access pluggable connectors
  • Rapid commissioning with the Unidrive M Connect PC tool and SD cards
  • Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features
    • Programmable with IEC61131 standard languages

  
  

  Flexibility

  • Two option slots for functionality extension and customization (see available option modules)
  • Built-in RS485 communications

  
  

  Safety on-board

  • Reduced downtime with machine safety

    - Integrated dual safe torque off

    - Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)

• Options

  Keypads

  	Remote Keypad RTC The keypad is remote mountable, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). Three line plain text, multi-language LCD keypad for rapid set-up and helpful diagnostics. Battery operated real-time clock allows accurate time stamping of events, aiding diagnostics.
  	KI Compact Display The display (fitted on M753, optional on M751) ensures access to drive diagnostics even in the absence of network connectivity. Includes 2 rotary switches for hardware setting of the node address for faster commissioning of the motion network.
  	KI-Compact 485 Adaptor This allows the drive to communicate via RS485. This is commonly used for programming if the drive has no keypad.

  System Integration Modules - Feedback

  	SI-Encoder Quadrature encoder input interface module.
  	SI-Universal Encoder Encoder input and output interface supporting Quadrature, SinCos, EnDat and SSI encoders.

  System Integration Modules - Communications

  	SI-PROFIBUS SI-PROFIBUS interface module enables follower connectivity. It is possible to use multiple SI-PROFIBUS modules or a combination of SI-PROFIBUS and other option module types to add additional functionality such as extended I/O, gateway functionality or additional PLC features.
  	SI-DeviceNet SI-DeviceNet enables follower connectivity. It is possible to use multiple SI-DeviceNet modules to provide additional functionality.
  	SI-CANopen Digitax HD's SI-CANopen interface module supports various profiles, offering optimum flexibility.
  	SI-Ethernet SI-Ethernet can be used to provide high speed drive access, global connectivity and integration with IT network technologies.
  	SI-EtherCAT SI-EtherCAT allows Digitax HD servo drive to connect and interface with EtherCAT networks.
  	SI-PROFINET RT SI-PROFINET allows Digitax HD to communicate and interface with PROFINET PLCs and networks.

  System Integration Modules - Applications

  	SI-Apps Compact Compatible module allows SyPTPro application programs to be re-complied for HD.
  	MCi200 Second processor, providing advanced customization using industry standard IEC61131-3 programming languages.
  	MCi210 Extended advanced machine control, provides MCi200 functionality with additional ports and simultaneous connectivity to 2 separate Ethernet networks.

  System Integration Modules - Additional I/O

  SI-I/O Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays.

  Drive interface units - Communications

  CT USB Communications Cable The USB Communications cable allows the drive to connect to a PC for use with our PC tools*.

  * Also requires KI-Compact-485 adaptor.

• Software

  Commissioning and monitoring software

  Connect - Commissioning tool Based on Control Techniques’ 25 years' experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.

   Automation and motion programming software

  Machine Control Studio - Programming tool Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Digitax HD’s new automation and motion control features.