Digitax ST Indexer - high performance features that offer easy to use point-to-point positioning functionality.
The drive can operate as a standalone controller or integrate with a wider automation system using fieldbus and I/O.
Enhance machine performance through easy integration with any motion controller
Tailor the drive to a variety of application requirements
Simplified motion programming
Tailor the drive to a variety of application requirements using options
Reduced downtime with machine safety
|
|
DIGITAX ST BASE |
DIGITAX ST EtherCAT |
DIGITAX ST |
DIGITAX ST |
DIGITAX ST |
|
Two option module slots |
√
|
√
|
√ |
√ |
√ |
|
Digital and analogue I/O |
√ |
√
|
√ |
√ |
√ |
|
Smartcard |
√ |
√
|
√ |
√ |
√ |
|
High speed freeze input |
√ |
√
|
√ |
√ |
√ |
|
Safe Torque Off |
√ |
√
|
√ |
√ |
√ |
|
DC bus paralleling |
√ |
√
|
√ |
√
|
√ |
|
CT Soft and CTScope commissioning software
|
√
|
√
|
√
|
√
|
|
|
Removable keypad (optional) |
√ |
√
|
√ |
√ |
√ |
|
RS485 PC programming port |
√ |
√
|
√ |
√ |
√ |
|
Intellectual property protection |
|
√ |
|
√ |
|
|
CTSoft programming |
|
√ |
|
√
|
|
|
Program multi-tasking |
|
|
√ |
√ |
|
|
PowerTools Pro programming |
|
|
√ |
|
|
|
SyPT Pro programming environment with PLCopen programming |
|
|
|
√ |
|
|
Drive-to-drive networking |
|
|
|
√ |
* Able to import Index Motion into SyPTPro
Available motor / drive combinations
NB: The selection of drive-motor combinations should be based on duty/load profiles of the application
|
FUNCTION |
QTY |
I/O DEFAULT FUNCTION |
RATING |
|
Analog input 1 |
1 |
Frequency /speed ref 1 |
±10V |
|
Analog input 2
|
1 |
Frequency /speed ref 2 |
±10V(default), 0-20mA or 4-20mA |
|
Analogue input 3 |
1 |
Motor thermistor |
±10V, 0-20mA, 4-20mA or Motor thermistor input (default) |
|
Analogue output |
2 |
Speed/frequency Torque (active current) |
±10V(default), 0-20mA or 4-20mA |
|
Digital input |
3 |
Run reverse input Analogue input 1/2 select Jog forward input |
+24V |
|
Digital input / output |
3 |
At zero speed output Reset input Run forward input |
+24V |
|
Relay |
1 |
Drive OK indicator |
Normally open |
|
Drive enable (Safe Torque Off) |
1 |
Safe Torque Off input |
+24V |
|
+24V External input |
1 |
External 24V supply |
+24V |
Drive dimensions
|
DRIVE MODEL RATINGS |
||||
|
MODEL |
RATED VOLTAGE |
NO. OF INPUT PHASES |
NOMINAL CURRENT |
PEAK CURRENT |
|
DST1201 |
230 |
1 |
1.1 |
2.2 |
|
DST1202 |
230 |
1 |
2.4 |
4.8 |
|
DST1203 |
230 |
1 |
2.9 |
5.8 |
|
DST1204 |
230 |
1 |
4.7 |
9.4 |
|
DST1201 |
230 |
3 |
1.7 |
5.1 |
|
DST1202 |
230 |
3 |
3.8 |
11.4 |
|
DST1203 |
230 |
3 |
5.4 |
16.2 |
|
DST1204 |
230 |
3 |
7.6 |
22.8 |
|
DST1401 |
400 |
3 |
1.5 |
4.5 |
|
DST1402 |
400 |
3 |
2.7 |
8.1 |
|
DST1403 |
400 |
3 |
4.0 |
12.0 |
|
DST1404 |
400 |
3 |
5.9 |
17.7 |
|
DST1405 |
400 |
3 |
8.0 |
24.0 |
|
SUPPLY REQUIREMENTS |
||
|
MODEL |
SUPPLY VOLTAGE |
SUPPLY FREQUENCY RANGE |
|
DST120X |
200V to 240V +/-10% single phase |
48Hz to 65Hz |
|
DST120X |
200V to 240V +/-10% three phase |
48Hz to 65Hz |
|
DST140X |
380V to 480V +/-10% three phase |
48Hz to 65Hz |
|
GENERAL DRIVE DATA |
|
|
TYPE |
DETAILS |
|
IP rating |
1P20 (UL Type 1 / NEMA 1) |
|
Weight (net) |
2.1kg (4.6 lb) Excluding keypad and option modules |
|
Ambient operating temperature |
0˚C to 50˚C (32˚F to 122˚F) Output current is derated at ambient temperatures >40˚C (104˚F) |
|
Operating humidity |
Maximum relative humidity 95% non-condensing |
|
Altitude |
0m to 3000m (9900ft). Derate the maximum output current for the specified figure by 1% per 100m (330 ft) above 1000m (3300 ft). |
|
Power cycles per hour |
60 starts per hour equally spaced |
|
Digital and analogue I/O |
3 dedicated digital inputs |
|
Vibration |
Tested in accordance to IEC60068-2-6/64 |
|
Mechanical shock |
Tested in accordance to IEC60068-2-29 |
|
Electromagnetic immunity |
Complies with EN61800-3 (2nd Environment) |
|
Electromagnetic emissions |
Complies with EN61800-3 (2nd Environment) with onboard filter.EN61000-6-3 and EN61000-6-4 with optional footprint EMC filter |
|
Safe Torque Off |
Approved by BGIA as meeting the requirements of the following standards for the prevention of unexpected starting of the drive: |
Keypads and parameter storage
|
|
Smartcard A memory device that can be used to back-up parameter sets and PLC programs, and copy them from one drive to another |
|
|
Digitax ST Keypad Digitax ST Keypad is a compact high brightness LED keypad for all Digitax ST drives |
Automation and Motion option modules
|
|
SM-Applications Plus SM-Applications Plus offers high performance programmable logic and motion control together with high speed I/O and CTNet, a high speed Fieldbus |
|
|
SM-Applications Lite V2 User programmable logic and motion control module for standalone drive applications or for when the drive is connected to a centralized controller via I/O or Fieldbus |
|
|
SM-Register A flexible, high performance solution for programmable motion requiring high speed registration features |
|
|
SM-EZMotion This module and Power Tools Pro software provide a user friendly environment for motion programmin |
Communication option modules
|
|
SM-CAN User programmable CAN option module, allows the development of CAN protocols |
|
|
SM-CANopen CANopen interface supports various profiles including several drive profiles |
|
|
SM-DeviceNet SM-DeviceNET option module |
|
|
SM-EtherCAT Follower option module, for high performance servo applications |
|
|
SM-Ethernet Supports Ethernet/IP and Modbus TCP/IP and can generate emails. Provides high speed drive access, global connectivity and integration with IT network technologies |
|
|
SM-Interbus Interbus interface option module |
|
|
SM-LON LonWorks interface for building automation applications |
|
|
SM-PROFIBUS-DP Follower option module |
|
|
SM-PROFINET PROFINET is an Ethernet based industrial network protocol adapting Ethernet hardware and protocols |
|
|
SM-SERCOS SERCOS interface Option Module |
Input and Output option modules
|
|
CTNet IO Flexible I/O system for remote connectivity with Control Techniques’ SM-Applications Plus and SM-Register option modules |
|
|
SM IO 24 V Protected Overvoltage protected I/O module |
|
|
SM-IO 120 V Module that provides digital I/O rated to 120Vac |
|
|
SM-IO 32 Extended digital I/O, adding 32 digital high speed bi-directional I/O points to the drive |
|
|
SM-IO Lite Extended I/O interface with reduced functionality |
|
|
SM-IO PELV NAMUR standard I/O interface with high speed I/O |
|
|
SM-IO Plus Extended I/O interface to increase the number of I/O points on a drive |
|
|
SM-IO Timer Extended I/O option module with real time clock |
Feedback option modules
|
|
SM-Encoder Output Plus Incremental encoder input and output option module that enables connection with external motion controllers |
|
|
SM-Encoder Plus Incremental encoder input option module |
|
|
SM-Resolver Resolver module is designed for robust feedback in demanding environments |
|
|
SM-SLM SLM module is designed for integration with SLM enabled motion controllers |
|
|
SM-Universal Encoder Plus Additional combined encoder input and output interface supporting Incremental, SinCos, HIPERFACE, EnDAT and SSI encoders |
Safety option modules
|
|
SM-Safety SM-Safety module provides an intelligent, programmable solution to meet IEC 61800-5-2 functional safety standard |
Control Techniques Windows-based software packages connect using Ethernet, CTNet, Serial or USB connections. Ethernet communications allow the drives to be accessed remotely, anywhere in the world.
Commissioning and monitoring software
|
|
CTSoft - Drive configuration tool for Control Techniques drives CTSoft is a drive configuration tool for commissioning, optimizing and monitoring Control Techniques drives |
|
|
CTScope - Real-time software oscilloscope CTScope is a real-time full featured software oscilloscope for viewing and analyzing changing values within the drive |
Automation and motion programming software
|
|
SyPTPro - System programming toolkit for drive automation systems SyPTPro provides a full featured programming environment for PLC and motion control onboard Control Techniques AC, DC and servo drives |
|
|
SyPTLite - Fast user program editor for Control Techniques drives SYPTLite is a ladder diagram editor allowing users to develop simple programs for Control Techniques drives and option modules |
|
|
PowerTools Pro - Advanced motion control programming Advanced motion control programming for Unidrive SP (with the SM-EZMotion module) and Digitax ST-Z drives and Epsilon EP, FM-3E and FM-4E modules |
Analysis software
|
|
CT Energy Savings Estimator - Energy optimizing software Il nostro software di calcolo del risparmio energetico consente di analizzare l'utilizzo di energia per varie applicazioni e di calcolare il risparmio sui costi ottenuto con i convertitori a velocità variabile |
|
|
CT Harmonic Calculator - Analysis of drive system harmonics CT Harmonic Calculator is a supply harmonics calculator that will help you to economically meet the required standards for your installation |
Connectivity software
|
|
CTOPCServer - OPC compliant server CTOPCServer is an OPC compliant server for interfacing your own PC software with Control Techniques drives |
Malaysia
