AERO® Semi-Custom Central Station Air Handler 39M 1,500 to 60,500 Nominal Cfm: 马来西亚的首选 United Faith Sdn Bhd

详情

39MN - Indoor / 39MW - Outdoor

Carrier’s Aero 39M air handlers provide advanced technology and custom features in a streamlined, easy to install package. Indoor and outdoor units are available to handle a wide variety of applications. Units can be equipped with HEPA filters, stainless steel sloped drain pans, Agion® antimicrobial coating and other options. The 39M unit’s double-wall casing allows panels to be easily cleaned without damaging the insulation inside. Available fan options include forward-curved, airfoil, and plenum fans for extra quiet operation. Factory-installed controls maintain airflow and ventilation requirements while helping to prevent coil freeze-up, excessive humidity and poor indoor air quality (IAQ). Carrier’s AHUBuilder® software makes selecting and optimizing the 39M air handler easy.

Performance Features

All units are shrink wrapped for complete protection while in transit
Maximum deflection ratio of L/240 at 8 in. wg.
Casing air leakage rate less than 1% at 8 in. wg. of unit nominal airflow
Doublewall panel construction, insulation is sealed between the inner and outer panels
Thermal break casing construction
Optional factory mounted controls
Chilled water, hot water, direct expansion (DX), electric and steam coils
Tubular indirect fired gas furnace option with a minimum of 10:1 turndown
Ultraviolet band C (UV-C) germicidal lamps
Multiple filtration from pleated MERV 8 to HEPA filters
Energy recovery ventilator (ERV) sections
Multiple fan options
Humidifiers for precise indoor climate conditioning
Internal and external face and bypass damper sections

Reliability Features

Optional 18 gauge exterior and/or interior skin
Standard insulated, fully drainable, sloped drain pans in galvanized or stainless steel

Maintenance Features

Optional prepainted and/or galvanized unit exterior
Optional aluminum diamond treadplate floors
All service may be performed through large, removable or hinged with lockable handle panels
Marine lights and viewports for interior component inspection

Installation Features

Units may be mounted in ceilings, closets, attics, etc.
Variable frequency drives are programmed and started up at the factory
Casing can be broken-down to individual panels and frame members

Factory-Installed Options

Filter options from MERV 8 flat filters to face loaded HEPA filters
Water coils
Refrigerant coils
Steam coils
Electrical heat
Tubular indirect fired gas furnaces
Humidifiers
Sound attenuators
Energy recovery ventilator wheel (ERV) sections

Size	Nominal Airflow* (Cfm)	Dimensions (in)**
Size	Nominal Airflow* (Cfm)	Height***	Width
03W	1500	37	33
06W	3000	37	46
07T	3500	60	39
08W	4000	40	54
09T	4500	57	42
10W	5000	40	67
11T	5500	66	45
12T	6000	66	48
12W	6000	47	67
14W	7000	47	72
16T	8000	75	51
17W	8500	50	79
18T	9000	78	54
21W	10500	60	79
22T	11000	84	60
25T	12500	89	61
25W	12500	60	86
30T	15000	89	72
30W	15000	60	104
35T	17500	92	80
36W	18000	71	109
37T	18500	108	72
40W	20000	77	109
42T	21000	107	80
50W	25000	87	117
51T	25500	107	93.5
58T	29000	120	93.5
61W	30500	102	117
72W	36000	113	120
85W	42500	113	139
96W	48000	126	139
110W	55000	126	157

*Airflow is based upon 500ft/min face velocity.

**Airway length is dependent upon selected components. Check the product catalog for individual airway length of components.

***Unit height includes 6-in. base rail on an indoor unit. Other base rail height options are available.

更多 United Faith Sdn Bhd 相关资料