Overview
The Centari system is versatile and easy to use. With a single set of concentrated pigment pastes and a set of binders, you can prepare any type of solvent-borne paint
Properties
- Centari 600 features ease of application and accurate color matching.
- The fast drying product covers at a low layer thickness (10-20 μ), provides an even coating with an optimal arrangement of aluminum particles in metallics.
- The use of BK220 is recommended to improve the performance of the coating.
- Can be used for spot, panel and complete repairs.
- This coating is also recommended for polychromatic and various design work.
Substrates
- All DuPont factory coatings and primers
Base coat application Apply
2 full coats to well prepared surface. Flash between coats until matt. If necessary, after 1-2 minutes. after applying the last layer, spray on the hazy (smoky) layer.
Varnish application
DuPont varnishes are applied only after the Centari 600 basecoat is completely matt, but no later than 3 days.
Equipment cleaning
Use 3608S.
Repainting
Allowed if the surface can already be wiped clean with a tack rag cloth.
Product data
Theoretical spreading rate: 6-8 m2 / l ready to use, at the recommended layer thickness
Notes
- Centari MasterTint Pigment Pastes must be thoroughly mixed before weighing, Centari 600 must be thoroughly mixed immediately after manufacture.
- To improve the chip resistance of the coating and to improve adhesion / cohesion, it is recommended to add 10% BK220 to the paint before thinning.
- Before use, keep the material at room temperature (18-25 ° C).
更多 Cheong Seng Hardware Sdn Bhd 相关资料
Malaysia
