NOVOTEST - Leeb Hardness Tester (T-D2): 马来西亚的首选 Carlssoon Technologies (Malaysia) Sdn Bhd

详情

NOVOTEST - Leeb Hardness Tester (T-D2)
Brand: Novotest
Model: T-D2

Descriptions:
The Leeb Hardness Tester NOVOTEST T-D2 correspond to to ASTM A956 is the most popular metal hardness testing method in the world, because of very easy to use and does not require special skills from the operator. The probe is mounted on the sample, and by pressing the release button, measurement is performed, and the hardness value is displayed on the device’s screen. The method works well with low alloy steels, stainless steels, as well as non-ferrous metals.
It is usually used for bulk products, without thorough surface preparation and is less sensitive to inhomogeneous or coarse-grained materials.

Advantages:

Wide range of hardness measurement
Allows to test the products with coarse, non-uniform structure (castings, forgings)
Very ease and simplicity in setup and operation
Reasonable price (lower in comparison with the ultrasonic hardness tester)

User can save the results of hardness measurements into the internal memory of the device and after that, transfer them to the PC. Device allows user to operate in a wide range of the temperature. Hardness tester T-D2 has a brightness high contrast display. Device also has calibration modes for hardness testing of wide range of metals and alloys.

Specifications:

Range of hardness value	Rockwell, HRC: 20 – 70 Brinell, HB: 90 – 650 Vickers, HV: 230- 940 Can be calibrated for any scale and any range.
Measurement accuracy	HRC: 2HRC HB: 10HB HV: 15HV
Hardness scale	Leeb probe – HRC, HB, HV, HL Additional custom scales for calibration.
Materials	Leeb probe – pre-calibrated for steel, alloy steel, stainless steel, aluminum or cast iron. Additional custom scales and materials for calibration.
Standards	ASTM A956, ASTM E140
Storage of measurement results	256
Dimensions, mm	1226523
Operating temperature range, ° C	-20 to +40
Power supply	2pcs AA batteries
Batteries life, not less, h	20
Weight of electronic unit with batteries, no more, kg	0.2

Available Options:

Additional probes of various types of Leeb probes (D, DC, DL, C, D+15, E, G). Also, after the purchase if will be needed, user can order the additional ultrasonic (UCI) probe U1 with activation code and will get combined hardness tester with two probes (Leeb+UCI). So that, user can save money and needn’t to buy two probes at one time
Batteries
Charger
Hardness test blocks
Set of support rings for D, DC type Leeb probes
Impact bodies for Leeb probes
Portable grinding machine
Case for hardness tester

Standard Package:

Hardness tester
Leeb probe (D type)
2pcs AA batteries
Charger
USB cable
Operating manual
Software for PC
Case