NOTE: The colours shown here are as close to actual paint colours as modern printing techniques allows.Due to different computer monitors/calibrations colours may vary slightly from the picture.
Physical Characteristics:
-
Ingredients: modified alkyd resin, mineral extenders, pigments and additives
-
Solvent : Mainly aliphatic hydrocarbon
-
Density : 0.95-1.20 (kg/litre)
-
Solid : Approximately 55%
-
Viscosity : 100 –110 sec. (Ford Cup 4 at 27 ± 0.5°C)
-
Coverage : 12-14 m2/litre
-
Colours : Refer to colour card
-
Gloss : Glossy
PROPERTIES:
-
Recommended Dry Film Thickness : 25-30 microns per coat
-
Drying Time : Touch dry : less or equal to 1 hours
-
Hard dry : less or equal to4 hours
-
Recoating Interval : > 4 hours
SURFACE PREPARATION:
-
Wood Surface
-
Metal Surface
-
Previously Painted Surface
APPLICATION METHOD:
-
Method of Application : Brush, roller or spray application
-
Product Preparation : Ready for use after thoroughly stirring. However, if thinning isrequired, not more than10% of mineral turpentine may beadded for brush and roller application; and for sprayapplication up to 15-20% of mineral turpentine may be added.
Malaysia
