We are the Leading Supplier of Stainless Steel Shim Plate 301.
SUS301 Stainless Steel is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel.
We export to Singapore , Indonesia , Brunei , Australia and other ASEAN Countries.
Our specialty is to provide wide range of stainless steel with no minimum order.
E Steel supply Stainless Steel 301 Spring Plate , Stainless Steel 301 3/4Hard Shim Plates and Stainless Steel 301 Full Hard Shim Plates with the range of thickness 0.0127mm - 2.0mm
E Steel is glad to be the Stainless Steel 301 (SUS301, SS301 Spring Steel) Suppliers Singapore , exporting to Singapore with shortest lead time , may refer : https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=96307
It is glad that you can purchase Stainless Steel Shim Plate through our Shopee Store : https://shopee.com.my/shop/324872858/search?page=0&shopCollection=133800327
Alloy | UNS Number | SAE Number |
SUS 301 | S30100 | 30301 |
SUS301 Stainless Steel is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel. The high strengths of this grade of steel in the six available conditions or tempers, its resistance to atmosphere corrosion and its bright, attractive surface make it an excellent choice for decorative structural applications. Automobile molding and trim, wheel covers, conveyor belts, kitchen equipment, roof drainage systems, hose clamps, springs, truck and trailer bodies, railway and subway cars are some of the major applications for this versatile grade. By varying the chemical composition within the limits set by the ASTM specifications and by temper rolling, a broad range of magnetic and mechanical properties can be obtained for a variety of applications.
Melting Point | Density | Specific Gravity |
Modulus of Elasticity in Tension |
2550-2590° F 1399-1421° C |
.29 lb/in³ 8.03g/cm³ |
8.03 |
28 X 106 psi 193 Gpa |
Alloy | C | Mn | P | S | Si | Cr | Ni | Mo | Cu | N | Other |
301 | .15 | 2.00 | .045 | .030 | .75 | 16.00-18.00 | 6.00-8.00 | .75 | .75 | .10 | – |
* All values are maximum values unless otherwise specified. Values are derived from applicable AMS and ASTM specifications.
Grade | Code | As Rolled | After Low-temperature Annealing | Bendability | ||||||
Hardness | Tensile strength | Elongation | Spring deflection limit | Hardness | Tensile strength | Elongation | Spring deflection limit | |||
HV | N/mm2 | % | N/mm2 | HV | N/mm2 | % | N/mm2 | |||
SUS301 | SEH | ≥ 530 | ≥ 1810 | – | (≥ 650) | ≥ 550 | ≥ 1940 | – | (≥ 880) | – |
EH | ≥ 490 | ≥ 1570 | – | (≥ 590) | ≥ 505 | ≥ 1665 | – | (≥ 785) | – | |
H | ≥ 430 | ≥ 1320 | – | (≥ 490) | ≥ 440 | ≥ 1400 | – | (≥ 655) | *4t R90° bending available | |
3/4H | ≥ 370 | ≥ 1130 | ≥ 5 | (≥ 390) | ≥ 380 | ≥ 1175 | ≥ 4 | (≥ 540) | 2.5t R90° bending available | |
1/2H | ≥ 310 | ≥ 930 | ≥ 10 | (≥ 315) | ≥ 315 | ≥ 960 | ≥ 8 | (≥ 390) | 2t R90° bending available | |
1/4H | ≥ 250 | ≥ 860 | ≥ 25 | – | ≥ 253 | ≥ 880 | ≥ 20 | – | 1t R90° bending available |
Specified Thickness (inch) |
Thickness Tolerances - Inch For the thickness and widths given |
||
Width | |||
3/16 to 6 Inch | Over 6 to 12 Inch | Over 12 to 24 Excl. | |
.005 to .010 Incl. | 10% | 10% | 10% |
Over .010 to .011 Incl. | .0015 | .0015 | .0015 |
Over .011 to .013 Incl. | .0015 | .0015 | .002 |
Over .013 to .017 Incl. | .0015 | .002 | .002 |
Over .017 to .020 Incl. | .0015 | .002 | .002 |
Over .020 to .029 Incl. | .002 | .0025 | .0025 |
Over .029 to .035 Incl. | .002 | .003 | .003 |
Over .035 to .050 Incl. | .0025 | .0035 | .0035 |
Over .050 to .069 Incl. | .003 | .0035 | .0035 |
Over .069 to .100 Incl. | .003 | .004 | .005 |
Over .100 to .125 Incl. | .004 | .0045 | .005 |
Over .125 to .161 Incl. | .0045 | .0045 | .005 |
Over .161 to 3/16 Excl. . | .005 | .005 | .006 |
* Note 1: Thickness measurements are taken at least 3/8 inch in from edge of the strip, except that on widths less than 1 inch the tolerances are applicable for measurements at all locatons.
* Note 2: Above tolerances include crown.
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.
E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors. We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally.