SLC-94 is designed for precision time (period) measurements, e.g. duration of time interval and mesurements of machine's operating time. Signals from push-buttons or contactors of control devices are connected to the terminals placed on back side of the counter. Properly programmed counter allows to measure time period between and signals. Other configuration allows to measure the activity time of signal. In addition the measure can be started, stopped and cleared using local keyboard (on front of the device) or via RS-485 interface. Apart from basic function of time counting, totalizer is also available. Both counters are triggered and stopped simultaneously. Time counting is realised in range 0 ms to 999 99.9 hours. Build in two relay outputs allow use of this counter for control in many time depend processes. The counter can be configured with the local keyboard or free S-Config software via the RS-485 communication port.
| Number of inputs |
2
|
| Input type |
pulse
|
| Input levels |
low: 0...1V; high: 10...30V
|
| Input frequency |
more than 10 kHz
|
| Output type |
relay I=1A, U=30V DC/250V AC (cosø=1)
Open Collector: I=30 mA, U=30V DC, P=100 mW
|
| Measurement method |
electrical, pulse
|
| Power supply |
16...35V AC, 19...50V DC
85..260V AC/DC
|
| Display |
LED, 6 x 13 mm, red
|
| Communication Interface |
RS-485 / Modbus RTU
|
| Transmission parameters |
1200...115200 bit/s, 8N1 / 8N2
|
| Operating temperature |
0...+50°C
|
| Protection class |
IP 20 (case and connection clips)
IP 65 (front)
optional integrated frame for panel cut-out sealing
|
| Case material |
NORYL-GFN2S E1
|
| Mounting |
panel
|
| Case dimensions |
96 x 48 x 100 mm
|
