DEFELSKO Certified Coated Metal Plates / Model: S2: 马来西亚的首选 ALLIANCE SUPPLIES SDN BHD

详情

Code	Ideal For	Approx. Thickness- Plate 1	Approx. Thickness - Plate 2	Approx. Thickness - Plate 3	Approx. Thickness - Plate 4	Coating/ Substrate	Accuracy
S1	PosiTector 6000 F, FS, FRS, FN, FNS, FNRS, FXS, FNDS / PosiTest* F & FM	0	75 μm 3 mils	250 μm 10 mils	1500 μm 60 mils	Epoxy on Steel (Ferrous)	± 0.43 μm ± 0.017 mil
S2	PosiTector 6000 F0S, F45S, F90S, F90ES / PosiTest DFT Ferrous & Combo	0	75 μm 3 mils	250 μm 10 mils	1000 μm 40 mils	Epoxy on Steel (Ferrous)	± 0.43 μm ± 0.017 mil
S3	PosiTest G & G / PosiPen A, B & C	0	15 μm 0.6 mils	40 μm 1.6 mils	100 μm 4 mils	Epoxy on Steel (Ferrous)	± 0.43 μm ± 0.017 mil
S4	PosiTector 6000 FXS*	0	75 μm 3 mils	1000 μm 40 mils	1900 μm 75 mils	Epoxy on Steel (Ferrous)	± 0.43 μm ± 0.017 mil
A1	PosiTector 6000 N, NS, NRS, FN, FNS, FNRS, FNDS	0	75 μm 3 mils	250 μm 10 mils	1500 μm 60 mils	Epoxy on Aluminum (Non-Ferrous)	± 0.43 μm ± 0.017 mil
A2	PosiTector 6000 NAS, N0S, N45S, N90S / PosiTest DFT Combo	0	75 μm 3 mils	250 μm 10 mils	500 μm 20 mils	Epoxy on Aluminum (Non-Ferrous)	± 0.43 μm ± 0.017 mil
A3	PosiTector 100B, 200, 200B	75 μm 3 mils	125 μm 5 mils	250 μm 10 mils	500 μm 20 mils	Epoxy on Aluminum (Non-Ferrous)	± 0.43 μm ± 0.017 mil

*PosiTector FXS probes with a range of 0-1500 um (0-60 mils) and Serial Numbers <361485 should use the S1 Standard.
‍All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
Plate Diameter: 38 mm (1.5'') Measurement Diameter: 25 mm (1'')

Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
Ideal for use in the calibration lab, in the field or on the factory floor
Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
Certified and labeled in both Metric and Imperial units

Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.

更多 ALLIANCE SUPPLIES SDN BHD 相关资料