DEFELSKO Certified Polystyrene Blocks / Model: P6: 马来西亚的首选 ALLIANCE SUPPLIES SDN BHD

详情

Code	Ideal For	Approx. Thickness - Block 1	Approx. Thickness - Block 2	Approx. Thickness - Block 3	Approx. Thickness - Block 4	Accuracy
P1	PosiTector 6000 FT, FTS, NTS, FNTS, FTRS PosiTector 200 D	375 μm 15 mils	2 mm 80 mils	4.5 mm 185 mils	6.5 mm 250 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P2	PosiTector 6000 FHS, FJS, NHS, EOC	2.5 mm 100 mils	6.5 mm 250 mils	13 mm 500 mils	19 mm 750 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P3	PosiTectAor 100 C	375 μm 15 mils	1.5 mm 60 mils	2.5 mm 100 mils	4.5 mm 185 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P4	PosiTector 100 D	1.5 mm 60 mils	2.5 mm 100 mils	4.5 mm 185 mils	6.5 mm 250 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P5	PosiTector 6000 FKS, NKS	1.5 mm 60 mils	2.5 mm 100 mils	6.5 mm 250 mils	12 mm 480 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P6	PosiTector 200 C	375 μm 15 mils	1.5 mm 60 mils	2.5 mm 100 mils	3 mm 125 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P7	PosiTector 6000 FHXS	1.5 mm 60 mils	4.5 mm 185 mils	6.5 mm 250 mils	9.5 mm 375 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P8	PosiTector 6000 FNGS, FLS	13 mm 500 mils	13 mm 500 mils	13 mm 500 mils	19 mm 750 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)

All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
P1-P7 Blocks: 38 x 70 mm (1.5'' x 2.75'') P8 Blocks: 76 x 76 mm (3.0'' x 3.0'')

Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
Ideal for use in the calibration lab, in the field or on the factory floor
Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
Certified and labeled in both Metric and Imperial units

Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.

更多 ALLIANCE SUPPLIES SDN BHD 相关资料