详情
Specifications & Ordering Guide
| Approximate Thickness |
Color |
Accuracy |
| 25 μm (1 mil) |
Orange |
± 20% |
| 50 μm (2 mil) |
Red |
± 10% |
| 125 μm (5 mil) |
Blue |
± 5% |
| 250 μm (10 mil) |
Brown |
± 5% |
| 500 μm (20 mil) |
Yellow |
± 5% |
Note: While DeFelsko inspects non-certified plastic shims to ensure they are within the nominal stated accuracy, they are not traceable to any national or international standard.
Certified Plastic Shims (foils) provide an economical alternative to coated metal plates. They have a reduced accuracy of ±2 µm (±0.08 mil). A coating thickness gage measures shim thickness when this shim is placed over a smooth metal surface (zero plate).
Non-Certified Plastic Shims (foils) provide a quick operational check of the instrument and they allow the user to perform practice measurements when placed over metal.
Alternatively, they can be placed over an uncoated metal substrate. They are not suitable for use with magnetic pull-off gages.
Shims overview:
- Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods
- For use with all Type 2, electronic coating thickness gages
- Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
- Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film
- Dimensions: 3 x 8 cm (1 x 3 inches)
Non-Certified Plastic Shims
- Provide a quick operational check of the instrument by allowing the user to perform practice measurements
- Can be used to protect the probe when measuring on tacky, rough or hot surfaces
- Labeled in both Metric and Imperial units
更多 ALLIANCE SUPPLIES SDN BHD 相关资料
Malaysia
