MANITOU MI 30D ROUGH TERRAIN FORKLIFT 3.0 TON: 马来西亚的首选 LM EQUIPMENT SDN. BHD.

详情

Simplicity, comfort, reliability, productivity. The MI 30 D is a heat engine forklift with a maximum capacity of 3 tonnes and was designed with logistics and distribution professionals in mind, amongst others. Sturdy and robust thanks to the careful selection of parts and simplified design, it's easy to maintain and is sure to remain a key machine in your fleet.For maximum operator safety and comfort, access to the driver's position is made easy: grip handle, anti-slip footsteps, access from both sides, etc. Visibility is maximised thanks to the slim profile rear posts, maximum space between masts and an openwork roof.

Overview

Technical Characteristic	Power source	Diesel
	Operator type	Seated
	Max. capacity	6613 lbs
	Load centre of gravity	1 ft 8 in
	Load distance, centre of drive axle to fork	1 ft 7 in
	Wheelbase	5 ft 7 in
Weight	Service weight	10163 lbs
	Weight on front axle (laden) / rear axle (laden)	14660 lbs / 2116 lbs
	Weight on front axle (Unladen) / rear axle (Unladen)	4100 lbs / 6062 lbs
Wheels	Tyres type	PPS
	Dimensions of front wheels	28-9-15 12
	Dimensions of rear wheels	6.50-10 10
	Number of front wheels / rear wheels	2/2
	Number of drive wheels	2
	Front wheel gauge	3 ft 4 in
	Rear wheel gauge	3 ft 2 in
Dimensions	Tilt of Mast Forward (deg) / Backward (deg)	6/12
	Height of overhead guard (cabin)	7 ft
	Seat height/stand height	4 ft
	Height of towing bar (coupling height)	1 ft 2 in
	Overall length	12 ft 9 in
	Length to face of forks	8 ft 11 in
	Overall width	4 ft
	Overall width - Single wheels	4 ft
	Forks section / width / length	2 in x 5 in / 3 ft 9 in
	Fork carriage ISO 2328 (class/form) A/B	3A
	Fork carriage width	3 ft 7 in
	Ground clearance below mast	5 in
	Ground clearance at centre of wheelbase	8 in
	Aisle width for 800 x 1200 pallet lengthways	14 ft 3 in
	Turning radius	8 ft 1 in
	Internal turning radius (over tyres)	6 in
Performances	Travel speed (laden / unladen)	11.1 mph / 11.4 mph
	Lifting speed (laden / unladen)	1.47 ft/s / 1.7 ft/s
	Lowering speed (laden / unladen)	1.41 ft/s / 1.57 ft/s
	Drawbar pull (Laden / Unladen)	1600 daN / 1380 daN
	Gradeability (laden / unladen)	20 % / 20 %
	Service brake	Hydraulic
Engine	Engine brand / model	Yanmar / 4TNV94L-BXPHZ
	Engine power according to ISO 1585	35 kW
	Rated speed	2400 rpm
	Number of cylinders / Capacity of cylinders	4 - 186.36 in³
	Fuel consumption according to VDI cycle	3.56 l/h
Miscellaneous	Working hydraulic pressure for attachments	11 PSI
	Oil flow rate for attachments	69 l/min
	Measured/guaranteed mean noise level at the ear of the operator	< 84 dB(A)

更多 LM EQUIPMENT SDN. BHD. 相关资料