SNAP-ON Advanced Multimeter TRMS-APP / Model: EEDM596FK: 马来西亚的首选 ALLIANCE SUPPLIES SDN BHD

详情

Capacitance	Yes
RPM	Yes
Low Pass Filter (LPF)	Yes
Replacement Fuses	EEDMFUSE-7 and EEDMFUSE-8
Adjustable Trigger Level	Yes
AC Volts	750
Basic DC Accuracy, %	0.1
Battery Type	9 Volt Lithium Metal (Not sold through Snap-on, purchase locally)
Micro Amps	Yes
Country Of Origin	KOR
Dimensions, inches	4.7 x 7.7 x 1.6
Noise Reduction Circuit	Yes
Case or Zipper Pouch (Included)	EEDM5F-CC
Temperature, (Included)	EEDMTEMP-1
mS Pulse Width	Yes
CAT Rating	CATIII 750 V AC, CATIII 1,000 V DC, CATIV 600 V AC/DC
Backlight	Always On
Auto Shut-off	Yes
Test Leads	EEDMLEADSET
Certificate of Calibration Model	EEDM596FKCRTâ€
DC Amps	10
Peak Hold	1 mS
UL® Listed	cULus 61010-1
Insulation Test	No
Analog Bar Graph	Yes
Resistance, ohms	40M
Data Hold	Yes
Auto Range	Yes
Duty/Dwell	Yes
True RMS (Root Mean Square)	Yes
AC Amps	10
Display Count	40,000
Fuses	EEDMFUSE-7, EEDMFUSE-8
Blown Fuse Identifier	Yes
Comp. Output (Bluetooth)	Yes
Display Type	Color Screen
Min/Max	Yes
DC Volts	1,000
Easy Open Battery and Fuse Door	EEDM5F-DOOR
Color Screen	Yes
Frequency	Yes

Features

Use in the following six quick steps: get the app, select unit of measure, connect leads to circuit, sync to remote device, take readings then diagnose, store and share results (mobile device sold separately)
Horizontal orientation is comfortable for button and dial operation
115% larger color display for excellent viewing
Bluetooth® remote display allows for one-tech testing, such as brake lights (mobile device sold separately)
Stores customer information and test results, with the ability to share via email, text or social media (mobile device sold separately)
CAT-III 1,000 V / CAT-IV 600 V hybrid safety rated
Convenient test lead storage wrap with retention strap
Built-in tilt stand and optional strap hanger (EEDMMAGSTRAP) for easy viewing
LCD display: 40,000 count with 42-segment bar graph
REC: Record mode stores minimum, maximum and average readings over a measurement period
RANGE: manually select range or allow auto-ranging
FUNCTION: toggle between functions on Ohm, TEMP and IG modes
REL (Relative Mode): factor out lead resistance for improved low ohm measurements or compare readings to a known standard—can also be used for differential measurements
CYL (Cylinder): selects the number of cylinders in IG modeHOLD: lock the reading on the display for hard to read locations or future reference
PEAK-H (Peak Hold): capture signals spikes as fast as one millisecond to diagnose intermittent events
Hz (Frequency): measure the frequency of sensors and signals
AC mV and DC mV Ranges: additional 40 millivolt DC range with 0.01 mV resolution for improved accuracy when performing low voltage measurements
DC V, AC V (DC Volts, AC Volts): measure the voltage of circuits, sensors and ABS wheel sensors
TEMP (Temperature): measure temperature with included temperature probe
AC/DC Current Functions: measure the parasitic draw from the battery
IP, IG (Automotive Functions): measure RPM, Duty, Dwell, mS pulse width, Frequency
AC/DC: manually select AC or DC measurement function
Quickly Test Condition of Internal Fuses: determine the status of the internal fuses before you open the battery/fuse compartment
Built-in Tilt Stand: tilt stand is built into the instrument housing, adding strength and integrity to the design
Capacitance: measure the capacitance of condensers or capacitors found in today's hybrid automobiles
Technical Support 888-382-6522

更多 ALLIANCE SUPPLIES SDN BHD 相关资料