SNAP-ON Digital Hybrid Multimeter (Certificate Of Calibration) / Model: EEDM604ECRT: 马来西亚的首选 ALLIANCE SUPPLIES SDN BHD

详情

Capacitance	Yes
RPM	EEDMRPMG (opt.)
Low Pass Filter (LPF)	No
Case or Zipper Pouch	EEDM650CPB
Replacement Fuses	EEDM604C1 EEDM604C2
Adjustable Trigger Level	No
Temperature	EEDMTEMP-1
AC Volts	1,000
Basic DC Accuracy, %	0.05
Micro Amps	Yes
Country Of Origin	KOR
Dimensions, inches	3-13/16 x 8 x 2-13/32
Noise Reduction Circuit	No
mS Pulse Width	Yes
CAT Rating	CATIII 1,000 V CAT IV 600 V
Backlight	Yes
Auto Shut-off	Yes
Certificate of Calibration Model	EEDM604ECRT
DC Amps	10
UL® Listed	cULus 61010-1
Glitch Capture	Yes
Insulation Test	No
Analog Bar Graph	Yes
Resistance, ohms	(plus conductance)
Data Hold	Yes
Auto Range	Yes
Duty/Dwell	Yes/Duty
True RMS (Root Mean Square)	Yes
AC Amps	10
Display Count	50,000
Blown Fuse Identifier	Yes
Comp. Output (USB)	No
Min/Max	Yes
DC Volts	1,000
Easy Open Battery and Fuse Door	EEDM650C-6
Color Screen	Yes
Frequency	Yes

Features

Color VA Type LCD Display - 50,000 count with 51 segment bar graph
Triple Display - activated with REC, REL, PEAK-H buttons
REC (Record Mode) - store minimum, maximum and average readings over a measurement period
RANGE - manual range option for each function
PEAK-H - peak hold button engages .25 millisecond rapid signal capture function to catch glitches
COMP (Compare) - activates the compare function to compare your reading against a known standard
REL% (Relative Percent Mode) - factor out lead resistance for improved low ohm measurements or compare readings to a known standard - can also be used for differential measurements
EDIT - use in conjunction with the COMP and arrow buttons to set the standard value for comparing readings
Gray Button - use to select gray functions noted on meter
HOLD - lock the reading on the display for hard to read locations for future reference
Ohms, Conductance, Continuity - toggle between measuring resistance, conductance and continuity buzzer
ACmV/ DCmV(AC or DC millivolts) - measure up to 500 AC or DC millivolts
ADP (Adaptor mode) - direct readout on the LCD when using optional accessories
DCV (DC Volts) - measure up to 1,000 V
ACV/Hz (AC Volts and Frequency) - measure up to 1,000 V AC - Push the grey button to view frequency, duty, and mS pulse width of the signal
Diode Test - test for good, open, or shorted diodes in circuits
CAP (Capacitance) - measure the capacitance of condensers and capacitors
Hz (Frequency) - measure the frequency, duty and pulse width of sensors and signals. Also used to measure temperature (gray button)
AC/DC Current Functions (Amps) - measure the parasitic draw from the battery with ignition off
External Testing of Internal Fuses - you can determine the status of the internal fuses before you open the battery/fuse compartment
Protective boot and built-in tilt stand
Technical Support 888-382-6522

更多 ALLIANCE SUPPLIES SDN BHD 相关资料