Adjustable Shoulder Strap ( Pair ) (P 8411CBT ): 马来西亚的首选 Foh Hup Industries Sdn Bhd

详情

Part No.	Description	Part No.	Description	Part No.	Description
8401S	Screw	8420W	Washer	8441 CPT	Automatic Release CPT
8401N	Nut	8421	Jam Nut	8441B	Union
8401	Tank Body	8422	Nipple Body	8442	Pin
8301	Tank Body	8422CPT	Nipple Body CPT	8443	Autorelease Lever
8301	Stand Guard	8422W	Washer	8445W	Washer
8405	Strainer	8424L	Tube for Nipple	8446	Sprayer Lance
8407A	Plastic Cover	8325	Air Cylinder	8447W	Washer
8408	Hook	8425	Air Cylinder	8448A-1	Cap
8411	Shoulder Strap	8428	Pull bar	8448A-2	Nipple
8411CPT	Shoulder Strap CPT	8429A	Pin	8448A CPT	Adjustable Cone Nozzle
8412P	TRI-Gride SRG-32	8430	Nut	8448A-R	O Ring
8413	Pump Handle CPT	8431	Brass Washer	8453	Union
8414	Milled Nut	8432	Piston	8454	Nipple
8415	Pump Cylinder	8433	Piston ROD	8455	PVC Hose
8415SH	Holder	8433VC	Brass Washer	8455CPT	PVC Hose CPT
8415W	Washer	8435	Plug	8455CR	Clip
8417	Ball Bearing	8436W	Washer	8458W	Washer
8418	Valve Body	8437S	Spring	8458F	Filter
8418CPT	Valve Body CPT	8440	Spindle	8459	Cleaning Chamber
8418W	Washer	8440R	O Ring	8470CPT	Four Hole Nozzle CPT
8418B	Screw	8441	Autorelease Body

Operating Instruction pfr Use

Screw the Spraying Lance (No. 8446) into the automatic Release (No. 8441) and fix the Adjustable Nozzle (8488A-1) into the Sprayer Lance. Then fix the Pump Handle (No. 8413) to the pump shaft (either on right or left.) The sprayer is now ready for use by moving the Pump Handle upwards and downwards.

Oil all moving parts regularly before use, including the inside of the Pump Cylinder (No. 8415) where the Piston (No. 8432) is situated with No. 30 cylinder oil (GREASE must not be used). Check and clean Ventilation holes on cover (No. 8408) These holes must not be blocked while the sprayer is in use.

Pump some strokes with closed Automatic Release in order to bring the sprayer under pressure and thus spraying can be obtained by pressingthe Lever (No. 8443) downwards. The Automatic Release will shuts automatically by just releasing the lever.

Operating Difficulties

Remove and clean Nozzles and Vortex which may be obstructed.
Unscrew the Air Cylinder and clean the Ball Bearing inside the Valve Body.
Make sure that all the Washers are tightly screwed to prevent leakage.

Precautions

Chemicals containing Corrosive Acids or highly Concentrated Mercury Compound should not be used

更多 Foh Hup Industries Sdn Bhd 相关资料