STARRETT Dial Indicator Diameter Gage / Model: 1101M-600-2

Specifications

•  Made in America: Yes
•  Range (mm): 450-600mm
•  Graduations (mm): .002mm

•  The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
•  There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
•  Gage depth is set by adjusting the gage feet up or down
•  A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
•  The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
•  Unless otherwise specified, the dial indicator sent with the gage reads in .0005'' increments with a total range of ±.030''
•  The dial has a double row of graduations reading in opposite directions – minus in red and plus in black