AP-AB1601A Explosion-Proof AC Ion Bar: 马来西亚的首选 LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.

详情

Product Description

Details

Specification

Model	AP-AB1601A	AP-AB1602A
Explosion-proof sign	Ex s ⅡB T4 Gb	Ex s ⅡB T4 Gb
Explosion-proof certificate No.	GYB16.1549X	GYB16.1549X
Working Voltage	Power frequency AC4000V	Power frequency AC4000V
Power	20W	20W
Ion emission	Power frequency AC	Power frequency AC
Transmitting electrode	SUS	SUS
Discharge structure	Resistance coupling	Resistance coupling
Electrode high voltage	≤4000V	≤4000V
Electrode needle combined capacitor	＜3.5pF	＜3.5pF
Discharge range	LWH（110mm→3000mm） 300mm100mm	LWH（110mm→3000mm）300mm600mm
Installation distance	30－100mm	100－600mm
Air pressure	——	≤0.6MPa
Compressed air connector	——	Φ8-G1/8 Red
Ion balance	≤\|±300V\|	≤\|±300V\|
Discharging speed	≤2.5S (Different test conditions will result in different test data)	≤2.5S (Different test conditions will result in different test data)
Working temperature	0°C – 50°C	0°C – 50°C
Working humidity	＜70%	＜70%
Bar material	Flame retardant PVC、AL	Flame retardant PVC、AL
Dimensions	LWH（110mm→3000mm） 20.4mm32mm	LWH（110mm→3000mm）28.6mm38.7mm
Installation accessories	Hex Bolts M4*20	Hex Bolts M5*20
Power supply	AP-AY1603/2603	AP-AY1603/2603
Power cord	2.5m (Can be customized according to requirements, the maximum length is 8m)	2.5m (Can be customized according to requirements, the maximum length is 8m)
Warranty	1 year	1 year
Certification	CE	CE

Installation

FAQ

NO.	Failure phenomenon	Cause Analysis	Method of exclusion	Remark
1	Put the electrode to the ground electrode on the side of the bar to ignite	Reduced surface insulation resistance due to bar volume ash	Power off the cleaning bar	In order to ensure the good performance of this product, according to the use environment and the required electrostatic protection requirements, Regularly use an electrostatic brush, dust-free cotton swab, and dust-free cloth to dip in absolute alcohol to gently remove carbon deposits on the discharge electrode and rod.
2	Discharge electrode to other metal grounding body	The bar installation position is too close to other metal grounding bodies	In order to ensure the safe use and power dissipation performance, the installation position of the bar should be moved, and it should be more than 50mm away from other metal grounding bodies.
3	Significantly reduced static elimination performance	Discharge needle contamination and damage	Clean or replace the ion bar
3	Significantly reduced static elimination performance	Incorrect orientation of the ion bar	Confirm the best installation position
4	Reduced static elimination performance	There are conductors or other ion bars around the ion bar	Remove (moving) conductors or other ion bars
5	Unable to discharge	Damaged high-voltage connection line	Return to factory
		Ion bar insulation is damaged	Return to factory
		Poor ground / no ground	Check the electrical grounding of ion bars and plant equipment
6	Product burnout	Ion bar insulation is damaged	Return to factory

After sales service

Maintenance
1. Do not disassemble the device.
2. Do not short-circuit the high-voltage power line to avoid permanent damage to the power supply.
3. Please check the power cord of the product regularly. If it is damaged, please replace it immediately, otherwise it may cause leakage and abnormal working.
4. The power supply should be stored in a cool and dry environment.
5. When abnormality or problem is found during the use of the power supply, stop using it immediately and send the power supply to Anping Company for processing.
After sales service
1. AP-AB1601A / AP-AB1602A explosion-proof AC voltage static eliminator has undergone strict testing and aging treatment before leaving the factory, and its performance fully meets the relevant indicators marked in the instructions.
2. AP & T promises to users as follows: Within one year from the date of purchase, the company repairs or replaces any spare parts that have been inspected for defects by the company free of charge. However, this commitment does not apply to the following situations:
(1) The equipment has been altered, misused, or installed;
(2) Damage caused by negligence or accident such as incorrect input voltage;
(3) Disassemble or repair by yourself or have been repaired by other service departments.
3. Except for the repair or replacement of the parts specified here, AP & T does not assume any obligations and relevant responsibilities of the product user.
Attachments
1. Warranty card
2. Instruction
3. Certificate of conformity
4. AP-AB1601A M4 mounting bolts (2 bolts within 1 m of rod length, each 0.5 m increase in rod length, 1 additional bolt) 2 bolts within 1m, each bolt length increases by 0.5m, an additional bolt)