详情
Description
TENDO ES, with zero interfering contour is used, when every centimeter in the machine room counts. The extremely short hydraulic expansion toolholder from SCHUNK is perfectly suitable for machining large work pieces – even in confined spaces in the machine room – and for deep-hole drilling.
Advantages – Your benefits
No interfering contour
Optimal freedom of movement where working space is limited
Fine-balanced by default
Suitable for high speeds with a balancing grade of G2.5 at 25,000 RPM
Micron precise tool change in seconds without peripheral equipment
Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices
Permanent run-out and repeat accuracy of < 0.003 mm
Even cutting action, increased tool service life, and reduced costs for regrinding or buying new tools
Excellent vibration damping
Micro-blowouts are prevented, best workpiece surfaces, machine spindle protection, increased tool service life resulting in cost reductions
Exact length preadjustment
Length adjustment in the range of 0.01 mm accuracy, with adjustment travel of 10 mm
High degree of flexibility
Clamping of different diameters due to the use of slotted or coolant-proof intermediate sleeves
Broad compatibility
Can be ideally combined with TENDO SVL and TRIBOS SVL extensions
Dirt grooves for reliable torque transmission
Dry clamping surfaces, by displacement of oil, grease or lubricant residues into the dirt groove
All commercially available tool shank types can be clamped
Form A: with smooth cylindrical shank, shank form A in accordance with DIN 1835 and DIN 6535 HA
Form AB: with flat face and cylindrical shank with pulling face, shank form B in accordance with DIN 1835 and DIN 6535 HB
Form B: with lateral pulling faces, shank form B in accordance with DIN 1835
Form E: with inclined clamping face, shank form E in accordance with DIN 1835 and DIN 6535 HE
Options and special information
Flexible clamping areas due to the use of intermediate sleeves
Intermediate sleeves allow clamping of various shank diameters from 3 - 32 mm with just one toolholder.
Your advantage: Reduction of the acquisition costs, higher clamping force at the given shank diameter.
Download PDF Below
更多 PGTC INDUSTRIES SDN BHD 相关资料
Malaysia
