TS-NS-468C - RJ45/BNC Cable Tester

详情

TS-NS-468C - RJ45/BNC Cable Tester

1. FUNCTION

1. Can test correspondingly double-twisted cables 1,2,3,4,5,6,7,8 and G, meanwhile, can judge wrong connection, short circuit and open circuit.
2. NS-468B tests BNC, RJH and RJ45 : NS-468 teste RJ11 and RJ45 : NS-468N tests RJ45 and BNC : ST-248 teste RJ45 and BNC.
3. Test of double-twisted cables : switch on the power. (S is slow automatic grade, M is manual.) Put cables into both main tester and remote tester.The lights od the main tester will turn on sequently from 1 to G   

            Main Tester : 1-2-3-4-5-6-7-8-G
            Remote Tester : 1-2-3-4-5-6-7-8-G      RJ45
                                       1-2-3-4-5-6                RJ12
                                         -2-3-4-5                   RJ11

Following are abnormal connection :

1. If one cable, for example cable No.3 is open circuited, the two No.3 light of the main tester and remote tester will not turn on.
2. If several cables are not connected, several light will not turn on respectively. If less than two cables are connected, none of the lights is on.
3. If two ends of a cable is disordered, for example No.2 and No.4. Than displays on :

            Main Tester       :  1-2-3-4-5-6-7-8-G
            Remote Tester  :   1-2-3-4-5-6-7-8-G

        4. If two cables are short circuited, neither of the corresponding light is on of the remote tester while main tester remains unchanged, If three cables,         including three, are short circuited, none of the corresponding light is on.

• If test patch panels or wall plate outlets, two cables which can match each other (eg 110P4 and RJ45) will be connected to the tester.
• If test cables of the same axes, BNC turns on when the cable works.

更多 Startech IT Sdn Bhd 相关资料