SK Levelnic DL-S2W Series / Model: 010017

Specifications

• Receiving Unit Type: D-SUB9
• Software Language: Japanese
• Base Material: Cast iron
• Weight: 2.1kg
• Measuring Range ± 5.000mm/m·± 0.2865°
• Minimum Reading 0.001mm/m·0.0001°
• Operating Temperature 0 ~ 40℃
• Accuracy ※1
  Operating temperature 17 ~ 23℃
  ± 0.85％ rdg（0 ~± 2mm/m, 0 ~± 0.1146°)
  ± 1.0％ rdg (± 2 ~± 5mm/m, ± 0.1146 ~± 0.2865°)
  Operating temperature 0 ~ 40℃
  ± 2.6％ rdg (0 ~± 2mm/m, 0 ~± 0.1146°）
  ± 2.7％ rdg (± 2 ~± 5mm/m, ± 0.1146 ~± 0.2865°)
• Repeatability Within ± 0.005mm/m·± 0.0003°
• Radio System Bluetooth Class1 ※2
• Power Source 9V 006P type dry cell 1 pc
  (nominal voltage 8.4V rechargeable battery can also be used)
  AC adapter (DC9V output ·AC100V ～ 240V) included
• Run time (Continuous use) 
  Alkaline dry cell： Approx. 10 hrs
  (nominal voltage 8.4V rechargeable battery： Approx. 3 ~ 4 hrs.)
  ※ May vary depending upon measurement conditions
• Dimensions L173 × W59 × H147mm (H： up to top of antenna)
  (base dimensions: L150 × W55mm)

• Shock resistant aluminum case
• Warranty·Instruction manual·Inspection report
• AC adapter (DC9V output·AC100V ~ 240V)
• 9V dry cell
• Receiving unit ※3　　
• Power source cable for wireless unit
• Dedicated display software

• High precision leveling of machine tools and surface plates.
• Straightness, flatness and vertical measurement.

• Body: Aluminum

• Wireless data transmission
• Wireless type Levelnic, useful for leveling and tilt measurement;
  -In overhead location
  -In places where the cable can not reach
• PC screen becomes display of Levelnic
  -Measurement data can be displayed on PC, using receiver and data display software
• Custom-made base can be attached to the threaded screw holes（M5 × P0.8）at the bottom base
  ※This model does not have display on the unit. PC or display unit is required for display the measured values.