NOVOTEST - Ultrasonic (UCI) Leeb Combined Hardness Tester T-UD3 (T-UD3): 马来西亚的首选 Carlssoon Technologies Sdn Bhd

详情

NOVOTEST - Ultrasonic (UCI) Leeb Combined Hardness Tester NOVOTEST T-UD3
Brand: Novotest
Model: T-UD 3

Descriptions:
Combined Hardness Tester NOVOTEST T-UD3 combines two methods of measuring hardness by an indirect method: Ultrasonic Contact Impedance (ASTM A1038) and Leeb (ASTM A956). This makes the device the most versatile portable device in the world.
The ability to connect both probes combines the advantages of both methods and providing users the opportunity to use the one that is most suitable for solving a specific task. The Combined Hardness Tester NOVOTEST T-UD3 allows user to measure the hardness of any metals, parts of any shape and thickness, measure the hardness of the surface hardened layers and evaluate the tensile strength.

Advantages:

Small indenter imprint (suits for mirror surfaces of shafts necks, blades, gear teeth, etc.)
Measuring surface hardened layers hardness
Wide range of hardness testing
Various measurement modes
88 combinations of materials and hardness scales (calibrations)
Calibration of any scale in any range
Convenience and ease of measurement
Optimized number of buttons
Large full-color graphic display with bright backlight
Built-in photo camera for thorough reports
Automatic probe types recognition
Connected probe types indication
The calibrations are stored in UCI probe memory
Extended operating temperature range (frost, down to – 40°C)
Internal memory and communication with a PC
New intuitive menu with tips on the buttons
Optional wireless mini printer
Waterproofed housing
Rubber bumper protected housing
Internal clock
Hardness value measuring for any mass products with more than 1 mm thickness (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)
Different operating modes:
- Graph – the graph building mode
- Histogram – the histogram building mode
- Statistics – provides statistics for the current set of measurements
- Smart – filters the incorrect measurements
- Signal – displays the probe signal (only for the Leeb probe)

Specifications:

UCI probe types	1kgf (10N) 2.2 lbf 5kgf (50N) 11lbf 10kgf (98N) 22lbf
Leeb probe types	D DC DL C D+15 E G
Measuring range	HRC:20~70 HB:90~650 HV:230~940 Tensile strength, MPa: 370~1740 User calibrations for any range (for example: HV100-1600)
Measuring accuracy	HRC: 2HRC HB: 10HB HV: 15HV
Standards	ASTM A1038 ASTM A956 ASTM E140
Indenter	UCI probe – Diamond indenter Leeb probe – Hardened ball
Measuring direction	Any direction 360°
Data storage	Limited only by the memory card up to 32Gb
Communication	Upload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scales	UCI probe – HRC, HB, HV Leeb probe – HRC, HRB, HB, HV, HL, MPa Additional custom scales for calibration
Materials	Ultrasonic (UCI) probe – pre-calibrated for steel Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper Additional custom materials for calibration
Data display	Load applied/contact (UCI) Angle (Leeb) Single test result Max, Min, Average of tests Number of tests, Deviation Var. coeff. Histogram, Signal and Smart Modes (Filter of incorrect measurements).
Indication	Color LCD display (320×240)
Operating environment	Temperature:-20°C~40°C Humidity: 30%~80%R.H.
Power supply	DC 4,5V (3 pcs batteries AA)
Instrument dimensions	160x75x30mm
Net weight	Approx. 0.3kg (without probe)
Gross weight (package)	2kg
Battery life	Approx. 10 hours.
Warranty	3 (1+2) years

Available Options:

Additional UCI and Leeb probes (different types)
Different colors of rubber bumper protected case
Wireless printer
Batteries
Chargers
Hardness tests blocks
Set of support rings for D, DC type Leeb probes
Impact bodies for Leeb probes
Portable grinding machine
Case for hardness tester
Can be equipped with three types of UCI probes:

98N(10 kgf)	Special type of probe with increased load. To carry out the measurement, it is necessary to apply a load of 10 kgf (set automatically by the probe).Low surface cleanliness requirements.	– Heat-treated and cemented parts with poorly prepared surface.- Measurement on blades, on the inner surface of pipes, holes with high roughness.
50 N(5 kgf)	The main type of probe for solving most hardness measurement tasks. To carry out the measurement, it is necessary to apply a load of 5 kgf (set automatically by the probe).Medium surface cleanliness requirements.	– Heat-treated and cemented parts, such as shafts, turbines, gears, teeth, welds, heat affected zones.- - Measurement in grooves, on teeth, in grooves, on radius surfaces.- - Measurement on the blades, on the inner surface of the pipes, holes.
10 N(1 kgf)	Probe with reduced load – designed to measure the hardness of products with increased requirements for the size of the print (polished, polished surfaces), to measure the hardness of thin surface hardened layers. For the measurement, a load of 1 kgf must be applied.More demanding on surface cleanliness, compared with U1 (50N).	– Nitrided and cemented surface layers of molds, dies, dies, thin-walled parts.- Bearings, tooth flanks, saws.- Hardness measurement of thin hardening coatings.- Measurement on products after thorough machining.

Standard Package:

Hardness tester
UCI probe (10N, 50N or 98N for choice)
Leeb probe (D type)
3pcs AA batteries
Charger
USB cable
Operating manual
Software for PC
Case

更多 Carlssoon Technologies Sdn Bhd 相关资料