RIKEN KEIKI-Portable Gas Leak Checker SP-220 Series
Brand : Riken Keiki
Model : SP220-Type SC, SP220-Type F
Description :
The SP-220 Leak Detector has a rugged, light weight design as well as a fast response time. Ease of operation will make pinpointing hard-to-find, low concentration gas leaks a simple procedure.
The lightweight SP-220-SC is a highly sensitive Gas Leak Detector for Toxic, Combustible and CFC Freon gases. The SP-220 type SC version uses a hot-wire semiconductor sensor (MOS) that can detect a range of target gases. Select from any of the forty listed gases for a direct reading referenced from a single calibration gas (PH3). This new model SP-220-SC replaces the SP-205ASC used by the semiconductor industry for high sensitivity leak checking of hydride gases.
The SP-220 Type F is a version exclusively for CFC Gases.
Specification :
SP-220 TYPE SC :
|
Sampling mehod |
Sunction type |
|
Principle of detection |
Hot Wire Type Semi-Conductor Method |
| Detection range | Depend on target gas |
|
Type of alarm |
Gas alarm/ Fault alarm |
|
Display of alarm |
Lamp blinking / intermittent buzzer sounding |
|
Explosion protected construction |
Non-explosion protection |
| Ingress proof rating | IP55 |
| CE marking | EMC / RoHS |
| Power source | AA alkaline battery x 2 |
| Continuous operation | 12 hours or more (normal temperature, without alarms or lighting) |
| Dimensions | Approx. 43 (W) x 200 (H) x 39 (D) mm (projection portions excluded) |
| Weight | Approx. 215g (without batteries) |
| Operating temperature range | -20 -+55 °C (no sudden changes) |
| Operating humidity range | 95% RH or less (Non-condensing) |
|
Sampling mehod |
Sunction type |
|
Principle of detection |
Hot Wire Type Semi-Conductor Method |
| Detection range | Depend on target gas |
|
Type of alarm |
Gas alarm/ Fault alarm |
|
Display of alarm |
Lamp blinking / intermittent buzzer sounding |
|
Explosion protected construction |
Intrinsic safety |
| Explosion-proof class |
IECEX : Ex ia IIC T4 Ga ATEX : II1G Ex ia IIC T4 Ga |
| Ingress proof rating | IP55 |
| Approvals | Japan Ex, ATEX, IECEx |
| CE marking | EMC / ATEX / RoHS |
| Power source | AA alkaline battery 2pcs |
| Continuous operation | Approx. 13 hours (normal temperature, without alarms or lighting) |
| Dimensions | Approx. 43 (W) x 200 (H) x 39 (D) mm (projection portions excluded) |
| Weight | Approx. 215g (without batteries) |
| Operating temperature range | -20 to +55 °C (no sudden changes) |
| Operating humidity range | 0 to 95% RH (no condensing) |
Malaysia
