CEDAR - Digital Torque Tester (DI-1M-IP200)

CEDAR - Digital Torque Tester (DI-1M-IP200)

Brand: Cedar
Model: DI-1M-IP200


Product Descriptions:

The Cedar DI-1M-200 Digital Torque Tester is perfectly suited for on-the-spot calibration of impact drivers and air tools. Calibrate your own air tools and impact wrenches and save down time. These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable. Virtual RS-232 serial output, auto zero reset, auto shutoff and low battery indicator complete the set of features. It is powered by an internal NiMH battery or the included AC adapter. 


Product Features:

• Blow counter shows number of blows and value of torque
• Enable to inspect operating torque of manual preset type torque wrench etc. in peak down mode
• Auto power-off function, Autoclear function are installed
• Data acquisition software can be downloaded for free
• The lineup of the DI-1M-IP Series is DI-1M-IP50, DI-1M-IP200
• Ergonomic light weight, torque tester with heavy duty metal construction
• Easy to read LED panel displays reference torque value in lbf-ft, kgf-m and N-m (selectable) and number of blows for selected period (0.1 - 9.9 sec)
• Peak, Real Time, and Peak Down measuring modes (selectable)
• Accuracy: ±0.5% F.S. ±1 LSD (32° to 100°F)
• Both clockwise and counterclockwise operation
• USB Virtual COM port (peak data only)
• Runs on internal NiMH batteries (8 hour use)
• AC charger included

Technical Specifications: