PCE - Gas Detector (PCE-GA 12)
Brand: PCE Instruments
Model: PCE-GA 12
Product Descriptions:
The gas detector PCE-GA 12 is a very easy-to-use measuring device. This gas detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the gas detector. Thanks to the semi-rigid hose on the gas detection device, the sensor can be aligned in almost any position to reach even inaccessible places.
This makes the gas detection device an ideal measuring device for employees who want to detect sporadically escaping gases (testing of plants during a tour of the plant, checking engines and supply lines, testing gas supply lines). A manual setting of the gas detector is not necessary as the gas detector automatically calibrates.
Product Features:
| Measuring range (only for methane) |
At low concentration 0 ... 1000 ppm At high concentration 0 ... 10000 ppm |
| Acoustic alarm | Volume: 85 dB |
| Sensitivity | < 10 ppm (with methane) |
| Measuring interval | < 2 seconds |
| Display | Measurement of combustible gases on the LC display, bar graphs |
| Calibration | Automatically |
| Warming up | 40 seconds |
| Battery | Polymer Li-Ion battery 158500 3.7V |
| Power adapter |
Primary side: 100 ... 240V, 50/60 Hz, 0.2A Secondary side: 5V, 1A |
| Automatic shutdown | Turns off if the battery capacity is too low by itself or after 10 minutes if not used |
| Sensor durability | About 5 years (sensor is interchangeable) |
| Probe | Semi-rigid 400 mm / 16mm'' |
| Weight | About 430 g / < 1 lb |
