About GLORYSTAR VS-CE Series
| ITEM | 3015 | 4015 | 4020 | 6015 | 6020 | 6025 | |
| Max Material Wigth (mm) | 3,000*1,500 | 4000*1,500 | 4000*2000 | 6000*1500 | 6000*2000 | 6000*2500 | |
| X Axis Travel (mm) | 1,520 | 2,020 | 1,520 | 2,020 | 2,520 | ||
| Y Axis Travel (mm) | 3,030 | 4,030 | 4,030 | 6,030 | |||
| Z Axis Travel (mm) | 290 | ||||||
| X/Y Axis Positioning Accuracy | ≤0.03mm/m | ||||||
| X/Y Axis Repeat Positioning Accuracy | ≤0.02mm/m | ||||||
| Max. Synthetic Positioning Speed | 100m/min | ||||||
| Max. Acceleration | 1.2G | ||||||
| Cutting Kerf Width | 0.1mm – 0.5mm (Actual Measured Value Of Plate Thickness 3mm | ||||||
| Cutting Surface Roughness | Ra3.2um-Ra25.4um (Actual Measured Value Of Plate Thickness 3mm | ||||||
| Min Setting Unit | 0.001mm | ||||||
| Machine Tool Footprint (mm) | 9,800*4,500 | 12,000*4,500 | 12,000*5,000 | 16,150*4,500 | 16,150*5,000 | 16,150*5,000 | |
| Host Volume (mm) | 8,800*2,700 | 10,700*2,700 | 10,700*3,200 | 15,150*2,700 | 15,150*3,200 | 15,150*3,700 | |
| 1,800 | |||||||
| CNC System | Glorystar | ||||||
| Monitor | 27”LCD | ||||||
| Transmission Mode | Double Driver System With Pinion & Rack | ||||||
| Worktable Max. Weight Capacity (T) | 1.4 | 1.88 | 2.5 | 2.8 | 3.7 | 4.7 | |
| To Installed Power Consumption (Approximately) | 1,000w | 15KW | 8,000w | 55KVA | |||
| 1,500w | 20KW | 12,000w | 65KVA | ||||
| 2,000w | 22KW | 15,000w | 80KVA | ||||
| 3,000w | 27KW | ||||||
| 6,000w | 42KW | ||||||
| Power Requirement | AC380V50Hz ; 3P+N+PE | ||||||
| Total Power Protecting Level | IP54 | ||||||
| •Specification is subject to change without further notice. | |||||||
Malaysia
