KENNEDY Throwaway Cutter, Short, 5mm, Cobalt High Speed Steel, Uncoated, M35 / Model: KEN0620160K

详情

Brand	Kennedy
Chuck Clearance	13.5mm
Cutter Diameter	5mm
Cutting Direction	Right Hand
ean	5036140092617
eclassCode	21010500
End Mill Type	Slot Drill
Finish/Coating	Uncoated
Flute Length	7.5mm
Length Type	Short
Material	Cobalt High Speed Steel
Material Application	Aluminium Aluminium Alloys Cast Iron Non-Ferrous Metals Steel
Material Grade	M35
Milling Application	End Milling Slotting
Number of Flutes	3
Overall Length	36mm
Plunge Type	Centre Cutting
Shank Diameter	6mm

Short Series - Metric
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.


Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.
*Except: 1mm cutters, 2mm and 1/16'' ball nose cutters all of which have two flutes.
Shank Diameter: 1.00 ~ 6.00 = 6.00mm, 7.00 ~ 10.00 = 10.00mm


Metric Tolerances:
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.


Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.


TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.


TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

 

更多 ALLIANCE SUPPLIES SDN BHD 相关资料