Introducing GRIP's Innovative Pneumatic Grippers: Unrivaled Precision and Versatility in Handling Technology

GP Parallel Gripper

Parallel Gripper with linear jaw movement. The double-acting cylinder is actuated by compressed air which actuates the movements. The vertical movement is converted into opposing horizontal movement via two angularly arranged springs.  The grippers are driven by wedge gear and can be equipped with a gripping force safety compression spring. The gripper position can be communicated using a reed switch on the drive cylinder (type "RS ..."). Depending on the installation, the gripping force safety device has a closing (GS) or opening (GÖ) effect.

The GP parallel grippers were developed to match the sizes of the quick-connect systems. The compact design of the gripper allows it to be used in the most difficult industrial conditions. The modular design makes possible a large number of high-quality design options while maintaining costs.
 

GP Parallel Gripper advantages:

• Wedge gear guided for optimal performance
• Extremely Durable
• Two-stroke version available
• Interface according to DIN EN ISO 9409-1
• The low-weight made of high-strength aluminum and steel
• Optional "open" and "close" gripping force safety compression spring
• Piston position communicated with a proximity switch ZG-RSGU01

GZ Angular Gripper

The Angular Gripper with pivoting jaw movement. The double-acting cylinder is actuated by compressed air which actuates the movements.  An eccentric mechanism ensures a long service life and a constant gripping torque. In contrast to the Parallel Gripper, the gripping force safety device can only be designed as a closing -GS- version.
 

GZ Angular Gripper advantages:

• Interface according to DIN EN ISO 9409-1
• The low-weight made of high-strength aluminum and steel
• Extremely Durable
• Eccentric drive for constant gripping torque over the entire gripping range
• Uniform torque over the entire opening and closing range of the fingers
• The opening angle has 60 degrees of adjustability
• Optional "closing" gripping force safety device
• Piston position communicated with a proximity switch ZG-RSGU01

GI Internal Gripper

The GI Internal Gripper is an inflatable bellows gripper for internal gripping. The Internal Grippers plunge into bore holes. Applying pneumatic pressure to the silicone membrane increases the outer diameter. This friction against the bore hole wall holds the Gripper in place. The silicone membrane automatically retracts once the pressure is relieved.

GI Internal Gripper advantages:

• Enables gripping of objects with small bores
• Tapered end ensures smooth insertion/operation
• Available in multiple sizes 5mm-20mm (1mm increments)
• Operating temperature range: -40 to 300°Celsius
• Durable – over 500,000 cycles
• Replaceable silicone bladder
• Lightweight
• Simple gripping principle
• Excellent value 
• Ideal for injection molding applications

GIS Internal Gripper Short

The GIS Internal Gripper Short is a further development of the GI Internal Gripper with an optimized gripping zone. The Internal Grippers plunge into boreholes. Applying pneumatic pressure to the silicone membrane increases the outer diameter. This friction against the borehole wall holds the Gripper in place. The silicone membrane automatically retracts once the pressure is relieved.
 

• Enables gripping of objects with small bores
• The blunt end allows full insertion (important in applications with limited hole depth)
• Available in multiple sizes 5mm-20mm (1mm increments)
• Operating temperature range: -40 to 300°Celsius
• Durable – over 500,000 cycles
• Replaceable silicone bladder
• Lightweight
• Simple gripping principle
• Excellent value
• Ideal for injection molding applications